PAIRING
Before use, you must pair the headset with your cell phone. Pairing will create a stored connection in the Z9 and your Bluetooth cell phone. Pairing has to be done only once, when first connecting to a phone. The Z9 can store pairing information for three (3) different Bluetooth devices.
Pairing Procedure - This is an example procedure only.
These steps may differ from phone to phone, but the process will be the same.
1.First turn the phone OFF and then back ON again to refresh its memory.
2.Bring the mobile phone to about 30cm from the Z9 Dual Microphone.
3.Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide)
4.With the Z9 OFF, Press and Hold the MFB for about 6 seconds until the LED flashes Blue.
5.Your headset is now ready to be discovered by your Bluetooth mobile phone.
6.Perform Bluetooth a device discovery on your mobile phone to add a new device. It takes a few seconds to search for and find other Bluetooth devices around you.
7.When Bluetooth devices are found, the phone will display "BlueAnt Z9". Scroll to it and press OK to confirm that you want to pair with it.
8.Enter the Passkey "0000" when your phone prompts you. The phone will now pair with the BlueAnt Z9.
9.If your Bluetooth phone menu supports it "set as authorized" or "add to trusted devices"
10. Again select the BlueAnt Z9 to connect with it. OR, Press the MFB to connect with the phone.
BUTTON FUNCTION MATRIX
Note:
Standby Mode means connected to a device but not on a call.
Idle Mode means the Z9 is
ON but not connected to any device
Multiple button presses mean click together
Z9 Function | Button | Time | Status |
Power ON | MFB | 3 Seconds | From OFF |
Power OFF | MFB | 3 Seconds | Idle/Standby |
Enter Pairing Mode | MFB | 6 Seconds | From OFF |
Connect to Device 1 | MFB | One Click | Idle |
Connect to Device 2 | MFB | Two Clicks | Idle |
Connect to Device 3 | MFB | Three Clicks | Idle |
Answer Call | MFB | Click | Ringing |
End Call | MFB | 3 Seconds | Active Call |
Reject Call | MFB | 3 Seconds | Ringing |
Redial Last Number | VOL | 3 Seconds | Standby |
Voice Dial Activate | MFB | Click | Standby |
Disconnect/Tranfer | & | Click | Connected |
Call Conference | VOL | 3 Seconds | Active Call |
Call Waiting | & | 3 seconds | Active Call |
Volume Up | VOL | Click | Active Call |
Volume Down | VOL | Click | Active Call |
Mute | VOL | 3 Seconds | Active Call |
Turn LED’s OFF | and | 3 Seconds | Idle/Standby |
Switch Voice Isolation | MFB | Click | Active Call |
between Standard and Max | |||
Reset Device | MFB & & | Click | Idle |