Quick Start Guide
1
First Time Turn ON
and Pairing
BlueAnt
Press the green button until the LED will blinks red/blue.
2
BlueAnt
Confirm language selection by pressing the green button as soon as your language is spoken on the SUPERTOOTH 3.
3
The SUPERTOOTH 3 will then ask you to pair your phone.
On your phone bluetooth menu, search for devices and select BlueAnt ST3 then enter 0000 as pincode.
4A
BlueAnt
Phonebook transfer will be initiated. Accept any connection request on your phone if prompted. Then wait until SUPERTOOTH 3 says:
“BlueAnt ST3 ready, connected to phone.”
4B
In case your phone doesn’t support automatic transfer (dont press the red key of your SUPERTOOTH 3), go to your phones “Contact Menu”, then select:
1) OPTION |
|
| |
2) | Mark all | if available |
|
3) | Option |
| |
|
| ||
4) Send or Send Business card |
| ||
5) | Via Bluetooth | BlueAnt | |
6) | Select BlueAnt ST3 |
| |
Note: Blackberry and Smart phone owners please refer to section F of user guide.
5A
“Voice Answer
Enabled”
BlueAnt
Activation of Voice Answer:
Press VOL + for 5 seconds until the SUPERTOOTH 3 confirms this mode.
5B
Deactivation of Voice Answer:
“Voice Answer
Disabled” | Press VOL - for 5 seconds |
| |
| until the SUPERTOOTH 3 |
| confirms this mode. |
BlueAnt |
|
NOTE: Voice activation or deactivation is possible only if you’re not on call.
6 | 7 |
Manual Answer | End / Reject Call |
Press the green button | BlueAnt |
Press the red button | |
to answer incoming call. | to end or reject a call. |
BlueAnt
8
Voice Answer (if option is activated)
“Call from John. (BEEP)”
BlueAnt
“OK”
After the BEEP, say clearly
one of the words below:
“ACCEPT CALL”
“ACCEPT”
“ANSWER”
“OK”
IMPORTANT: Voice answer will not work if you don’t wait for the BEEP.
The Bluetooth® word mark and logos are registered trademarks owned by | www.blueantwireless.com |
Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license. |