Pioneer BDP-LX70A operating instructions Ventilation Caution

D3-4-2-1-7c_A_En

D3-4-2-2-2a_A_En

D3-4-2-1-4_A_En

D3-4-2-1-3_B_En

D3-4-2-1-7a_A_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,	CAUTION:	The exclamation point within an equilateral
within an equilateral triangle, is intended to	TO PREVENT THE RISK OF ELECTRIC	triangle is intended to alert the user to the
alert the user to the presence of uninsulated	SHOCK, DO NOT REMOVE COVER (OR	presence of important operating and
"dangerous voltage" within the product's	BACK). NO USER-SERVICEABLE PARTS	maintenance (servicing) instructions in the
enclosure that may be of sufficient	INSIDE. REFER SERVICING TO QUALIFIED	literature accompanying the appliance.
magnitude to constitute a risk of electric	SERVICE PERSONNEL.
shock to persons.		D3-4-2-1-1_En-A

CAUTION

This product is a class 1 laser product, but this	The following caution label appears on your unit.
	Location: inside of the unit
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.

D3-4-2-1-8_B_En

2

En

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

D3-4-2-1-7b_A_En

Operating Environment

Operating environment temperature and humidity:

+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

WARNING

Before plugging in for the first time, read the following section carefully.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230 V or 120 V) written on the rear panel.

CAUTION

The ￿ STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).