Pioneer FM1200 user manual Calls

Suppress beep tones. Indicator C lights while suppressing.

- Beep	On / Off
Keyboard beep.
- Beep	Volume: ---
Volume of keyboard beep.
- Roger beep	On / Off

Transmit a beep on keying off the transmitter.

- DTMF tones *** ms

Define length of DTMF tones. Adjust value with number keys.

- ZVEI tones *** ms

Define length of ZVEI tones used for 5-tone calling. Adjust value with number keys.

Tone burst	*** Hz
Define audio frequency used for opening
repeaters.
Callsign generator	Submenu!
- Callsign generator	On / On (hold TX) / Off

The transceiver may transmit text in Morse. 'Hold TX' causes the transmitter to remain keyed until the text is finished.

- After callOn / Off

Callsign may be transmitted immediately after 5- tone sequence.

- Callsign<text>

Define callsign transmitted during normal transmissions. See Heading 10.

- Callsign generator	Speed: ***
Define Morse speed (0-40).
Adjust value with number keys.
- Callsign generator	Only TX / TX & LSP
Callsign may be sent to loudspeaker
- Callsign generator	After TX: *** sec

Callsign generator is activated *** seconds after the transmitter is keyed. Adjust value with number keys.

- Callsign generator Every: *** sec

Callsign generator is activated every *** seconds. Adjust value with number keys.

User	Submenu!
- LCD backlight	Off after: *** s

LCD backlight is switched off automatically ***

seconds after last action.

- My number***

Define user's personal 5-tone code. The transceiver produces an alarm tone on reception of this code.

- Reply***

This code may be transmitted when the personal code is received.

- ReplyYes / No

Enable/disable replying to personal code.

- Key acceleration Accel.: X

Define acceleration of up and down key. The longer the key is pressed, the faster frequencies will be stepped through.

- KeysRepeat / Once

If a key is held pressed, its function may be automatically repeated.

- Settings Update / Fixed

When 'Update' is selected, all settings are stored on switching off. 'Fixed' allows settings to be stored manually using the next menu item. When switched on, the transceiver employs the previously stored settings.

- Settings	Store
This allows you to store settings.
- Memory	Copy now
This allows the contents of the 24C65/64
EEPROM to be copied.
- <Language>	Nederlands / English /
	Deutsch
Select one of three languages.
- Status	Diagnosis

If the error indicator F is visible, the cause of the problem may be called up by pressing the H button.

18. Calls

The transceiver allows up to 10 different tone sequences to be stored. These tone sequences may be used to selectively call up stations.

Calling:	Display:
- Press H	(Select Function )
- Press 0	(Call:	)

-Select the number/station to be called

-Press #

Defining the codes:	Display:
- Press H	(Select Function )
- Press 0	(Call:	)
- Select the number/station to be called.
- Press H	(Name:	)
- Enter name, see Heading 10
- Press H to confirm	(Nr.	)
- Enter the number
- Press H to confirm

The H button is used to confirm entries. Cancel entry with any other key.

- 6 -