Panasonic WA-H60N, WA-H120N specifications 90W MAX, 60W RMS 180W MAX, 120W RMS, System Diagram

A M P L I F I E R S

MIXING AMPLIFIER	MIXING AMPLIFIER
WA-H60N	WA-H120N
90W (MAX), 60W (RMS)	180W (MAX), 120W (RMS)

•There are a lot of input jacks: 3 for microphones, 6 for lines, paging and chime

•5-station speaker selector: selectable up to 5 announcement locations. All announcement is possiblewith the ALL switch,

whether the speaker selector is ON/OFF.

•5-point LED level meter makes to check the sound level easy.

•Smooth and clear announcement call is possible, since the FRONT MIC input and LINE4/CHIME and LINE3/PAGING

input are incorporated a priority circuit.

MUTING FUNCTION: effects to the audio signal supplied from FRONT MIC, LINE 4/CHIME and LINE 3 PAGING Jacks.

Volume	Announcement through
	FRONT MIC, LINE4/CHIME
	or LINE3/PAGING

Radio
BGM	Time

SPECIFICATIONS

Model No.		WA-H60N			WA-H120N
Power Supply		AC 110 V - 120 V/AC 220 V - 240 V (50/60 Hz)
Power Consumption Rated Output		123 W		248 W
Rated Output		60 W (100 V/170 Ω Load), 90 W (MAX)		120 W (100 V/83 Ω Load), 180 W (MAX)
Frequency Response		50 - 20,000 Hz ±3 dB (LINE 2:1/3 rated output)
Distortion Rate		less than 0.5 % (LINE 2:1 kHz rated output)
Tone Response		more than 100, 10,000 Hz ±10 dB (1kHz standard)
S/N Ratio		more than 75 dB (on JIS A-Curve)
Speaker Switch		5 Station +ALL
Muting Level		0 - 35 dB
	Input Circuit	Input Impedance	Input Level		S/N	Jack
	Front MIC	10 kΩ Electronically balanced	–66 dBV		more than 55 dB	Large, multiple
Input	*1LINE 5/MIC 1	50 kΩ Electronically balanced	–20 dBV/–66 dBV		more than 60 dB	Large, multiple
	*1LINE 6/MIC 2	100 kΩ Electronically balanced	–20 dBV/–66 dBV		more than 60 dB	Large, multiple
Circuit	*1LINE 3/PAGIMG	20 kΩ	–20 dBV/0 dBV		more than 60 dB	Large, multiple
	*1LINE 4/CHIME	200 kΩ	0 dBV/–30 dBV		more than 60 dB	Large, multiple
	LINE 1	20 kΩ	–20 dBV		more than 60 dB	Pin (2)
	LINE 2	20 kΩ	–20 dBV		more than 60 dB	Pin (2)
	PA INPUT	20 kΩ	0 dBV		more than 75 dB	Pin
Output	Output Circuit	Load Impedance	Output Level		Load Impedance	Output Level
	LINE OUT	more than 10 kΩ	0 dB		more than 10 kΩ	0 dBV
Section*2	REC OUT	more than 10 kΩ	0 dB		more than 10 kΩ	0 dBV
	Speaker Out Terminals	Screw jack	100 V/70 V/50 V		83 Ω /41 Ω /21 Ω /4 Ω	100 V/70 V/50 V
	Speaker Out	170 Ω /83 Ω /41 Ω /4 Ω
Dimensions (W x H x D)		420 x 88 x 300 mm
Weight		approx. 8.4 kg		approx. 9.8 kg
Finish		Panel: Gun Metallic (ABS Resin)
		Case: Munsell N2.5 (Colored Steel Plate)

*1 Factory preset LINE IN

*2 Speaker selector: 5 station +ALL (100 V LINE)

System Diagram

MIC1,MIC2 Input terminal

(-66dB,10kΩ Balaced)

LINE 5 MIC1

LINE 6 MIC2

LINE4

0dB, 200Ω Play

Unbalaced

LINE 3 PAGING	LINE 4 CHNE
LINE4	Tape Deck
Input Terminal
(-20dB,10kΩ Balaced)
1/4-type Phone Plug
SP HOT(N)
1-5

			Line Out	Input
		LINE 2	PA Input	Output
	Play	-20dB,10kΩ
		Unbalanced		Graphic Equalizer
Tape Deck		LINE 1	REC Out	REC
		-20dB,10kΩ
		Unbalanced

Tape Deck

CD Player PA Input

for Parallel operation

Mixing Amplifier

Front MIC Input Terminal (-66dB,10kΩ Balaced)

4