Wall Installation | Williams Sound TEL 030 specs

Installation Guide & User Manual

PhoneMax ® Model TEL 030

Fig. 6: Handset Hanger Adjustment

Handset Hanger

Lift up, rotate 180º, and release

Step 3: Plug the short line cord into the jack on the top of the telephone and thread the line through the chan- nel to the cavity on the back of the base unit.

Step 4: Hold the telephone next to the wall-phone jack and plug the line cord into the jack, leaving any slack in the base unit cavity. Then push the phone against the mounting studs so the studs are hooked into the upper and lower keyhole slots of the phone. Slide the phone down until it snaps into place. (see Fig. 7)

Fig. 7: Wall Installation

Short Wall Cord

Wall Mount

Bracket

Studded Wall

Phone Plate

Step 5: Check for a dial tone. If you can’t hear a dial tone, see In Case Of Difficulty, page 12.

Note: To remove a wall-mounted telephone, slide the phone up and pull it slightly away from the wall. Disconnect the line cord by squeezing the clip on the modular plug and pulling it from the jack.

8	Williams Sound ®

Helping People Hear