Answering calls
Depending on the system hardware/ software configuration, Call Display information (CLID) for incoming exter- nal calls will appear on the display. Your system administrator must enable the CLID feature for your handset in system programming.
To answer a call:
•Press 
to answer a call when your handset rings.
•If you are using headset, press any key on the handset to answer the call.
To stop the handset ringing without answering the call:
•Press 
and the ring signal is muted. The display shows:
»RINGER MUTED«
•Alternatively, press one of the volume control buttons to mute the ringing signal.
Hold a call
1While on a call, press R (
).
2To retrieve the held call, press R (
) again.
24