Nortel Networks C3050 REV2 manual Discrete Ring Key Click Keypad Light, ’ or , Discrt ring OFF, ´

Discrete Ring

Key Click Keypad Light

If you want your portable to ring once, press Ï, ’ or ”, Discrt ring: ON, ´. Set the ringer control switch to the middle («) position.

To prevent your portable from ringing, set the ringer control switch to the middle («) position and press Ï,

’or ”, Discrt ring: OFF, ´.

Hint: To stop the ringing or vibrating during an incoming call press µ.

With Key click turned on, you hear a short beep each time you press a button.

Your portable’s keypad and display have a light that is helpful in low-light conditions. You can extend the life of your batteries by leaving the keypad light off when you don’t need it.

Press Ï, ’ or ”, select Keypad light, and select ON or OFF as needed.

15