Memorex MPH2089 operating instructions Setting the Unit to the ANSWER-OFF Mode, Toll Saver

MPH2089 O/M.QXD 9/4/01 10:30 AM Page 9

OPERATION (CONTINUED)

SETTING THE UNIT TO ON MODE (Incoming Messages will be recorded)

When the answering machine is turned on, when a call is received the unit will play the OGM and then record a message.

Make sure the OGM is recorded. Press the ON/OFF button; the NEW MESSAGE indicator will light solid and the unit will announce, “Answer On”

NOTES:

•If the unit detects a dial tone, silence or a busy signal, the unit will hang up and may not register the message.

•When the memory is full, no ICMs can be recorded.

•When the batteries are low, dead or not installed, “Lo” will appear in the display.

SETTING THE UNIT TO THE ANSWER-OFF MODE

Press the ON/OFF button and the NEW MESSAGE indicator will go out and the unit will announce, “Answer Off”

TOLL SAVER

This unit has a built-in toll saver feature that will have the answering machine answer the call after 4 rings when no new messages have been recorded and it will answer after 2 rings when messages have been recorded. This is useful in if calling in to get your messages.

9