NEC 824 Placing and Answering Calls, Placing an Outside Call, Calling a Co-Worker, Dial Block

Page 2

Placing and Answering Calls

Placing an Outside Call . . .

Dial access code for an outside line:

The instructions in this guide assume your system uses default program settings (e.g. Dial Plan 2).

1.Lift handset.

2.Press

3.Dial a 2-digit outside line number (e.g., 01, 02).

4.Dial outside number.

If your system is behind a PBX, you may have to dial 9 before your number.

To Flash a CO line, flash the hook- switch and dial 90.

Calling a Co-Worker . . .

Dial using the Intercom:

1.Lift handset.

2.Dial your co-worker’s extension number.

If you hear ringing, wait for an answer. If you hear a beep, begin speaking.

To Page, dial 80 for All Call or 81-84 for internal zones. External zones are 85 or, for Portrait 824 only, 86-87.

3.(Optional) Dial to force the call to ring your co-worker.

Block outgoing calls from your phone . . .

Dial Block

Enter 4-digit code

to temporarily block outgoing calls on

your phone:

1.Lift handset.

2.Press .

3.Dial Personal Code (4 digits).

4.Hang up.

Image 2
Contents Single Line Telephone Quick Reference Guide 82400SLO04 AprilCalling a Co-Worker Placing and Answering CallsPlacing an Outside Call Block outgoing calls from your phoneStep Calling If your call doesn’t go throughCamp On and Callback Have a telephone meeting Conference Message WaitingAnswering Calls Redirect your call Handling Your CallsYour call can wait at your phone HoldForward your calls to a co-worker Last Number Redial Placing Calls QuicklyAutomatically redial calls Speed DialPossible Dial Codes for Dial Plan 2 Phones Outside Call Place Reminder Call Speed DialIntercom Dial Codes for Phones Using Dial PlanCall Forward Dial Block Extension Hunting Meet-MeQuick Reference for Other Features Tones you may hearPart No SLO04 April Issue
Related manuals
Manual 12 pages 46.59 Kb Manual 96 pages 237 b