NEC DS1000 manual Mounting the Base to a Wall Plate, Installation

Page 12

Installation

Wall-Mounting the Base

Mounting the Base to a Wall Plate

To mount the base on a standard wall plate (Figure 6: Mounting the Base to a Standard Wall Plate):

1.Snap the base onto the wall-mount bracket.

-Make sure the mounting ears ﬁt all the way into their slots and the mounting tabs snap into place.

2.Run a customer-provided short line cord in the wide wire channel as shown and plug it into the base.

3.Run the AC adaptor cord in the narrow wire channel as shown and plug it into the base.

4.Plug the other end of the short line cord into the wall plate modular jack.

5.Slide the wall-mount bracket onto the wall plate.

Mounting ear

80683 - 15

Line cord in wide channel

	AC adaptor cord
Mounting tab	in narrow channel
Mounting tab

Wall Plate

Wall

Figure 6: Mounting the Base to a Standard Wall Plate

To remove the base from the wall:

1.Slide the wall-mount bracket off of the wall plate.

2.Unplug the short line cord from the wall plate.

3.Unplug the short line cord and AC adaptor cord from the base.

4.Press the mounting tabs to release the wall-mount bracket from the base.

8 ◆ Chapter 1: Installation

DS1000/2000 Cordless Telephone User Guide

Image 12

Contents DS1000/2000 900 MHz Cordless Telephone Installation Tips Cordless Telephone User GuideNEC Uniﬁed Solutions, Inc Table of Contents Feature Operation Feature SummaryTable of Contents Regional Defaults OverviewProgramming Ring Down DestinationUsing the Basic Features Basic OperationUsing Your Handset Using Your HandsetInstalling the Base Connecting the BaseTo connect the AC Adaptor to the base Checking the Base LEDs Installing the Base Guidelines for Placing the Base Cont’dCorrect Installation Methods Wall-Mounting the Base Mounting the Base on the WallMounting the Base to a Wall Plate Installing the Battery Installing the Battery in your HandsetInstalling the Charger and Charging the Handset Cleaning the Battery Charger ContactsCharging the Handset Wall-Mounting the Charger Wall-Mounting the ChargerUsing the Belt Clip Installing the Belt ClipInstalling Headset P/N 750638 M145 Earloop Style Earloop InstallationTo install the earloop recommended Installing the Ear Loop Ear Cushion Installation Installing the Ear Cushion InstallationConnecting the Headset and Using the Controls Connecting the HeadsetInstalling Headset P/N 750637 M175 Headband Style Optional Earloop InstallationTo install the optional earloop Removing the Ear Cushion Connecting the Headset and Using the Controls Installation Handset Battery Power RequirementsSpeciﬁcations and Parts SpeciﬁcationsDS1000/2000 Cordless Telephone Speciﬁcations Environmental Barge Call Coverage KeysTo Barge In on an extension or line Call Coverage Key Flash RatesCall Forwarding Call Forwarding Off PremiseCall Waiting / Camp On Callback Caller IDCentral Ofﬁce Calls, Answering Central Ofﬁce Calls, PlacingTo place an outside call using Line Group Access To set up a ConferenceConference Directed Call PickupDistinctive Ringing Do Not Disturb OverrideExtension Hunting Forced Trunk Disconnect Group Call PickupGroup Ring HoldHotline IntercomLast Number Redial Meet Me Conference Message WaitingMicrophone Mute Monitor / Silent MonitorNight Service / Night Ring Off-Hook SignalingPaging ParkPrime Line Preference Privacy Release GroupsProgrammable Function Keys To place a call on your Prime LineCordless Telephone Programmable Function Keys To removes lines and extensions from service Removing Lines and ExtensionsReverse Voice Over Ringing Line PreferenceSave Number Dialed Speed Dial SplitTo dial a System Speed Dial number To dial a Personal Speed Dial numberTandem Trunking TransferTrunk Line Queuing and Callback Voice MailVolume Control Voice OverWalking Class of Service Cordless Telephone Feature Summary DS1000/2000 Cordless Telephone Feature Summary Page 1DS1000/2000 Cordless Telephone Feature Summary Page 2 ICMDS1000/2000 Cordless Telephone Feature Summary Page 3 Feature Summary Other Important Telephone Numbers 80683INS01