AT&T 1477 user manual If you lose a call

Page 42

91-005677-031-000.ATT1477.RO.qxd 2/13/1950 7:21 PM Page 40

Appendix

In case of difficulty

If you lose a call

• You were probably almost out of range. Move closer to the base

after changing

before changing channels. Before placing another call, set the hand-

channels

set in the base for at least 15 seconds.

 

 

Incomplete

• If a caller leaves a very long message, part of it may be lost when the

messages

system disconnects the call after 4 minutes.

 

• If the caller pauses for more than 7 seconds, the system stops

 

recording and disconnects the call.

 

• If the system’s memory becomes full during a message, the system

 

stops recording and disconnects the call.

 

 

Difficulty hear-

• Press ^to increase speaker volume.

ing messages

 

System does not answer after correct number of rings

•Make sure that the answering system is on.

•If Toll Saver is activated, the number of rings changes to two when you have new messages (see page 32).

•In some cases, the system may be affected by the ringing system used by the local telephone company.

•If the memory is full or the system is off, the system will answer after 10 rings.

“CL” appears in

• You need to reset the answering system clock (see page 29).

message window

 

System does not respond to remote commands

•Make sure to enter your Remote Access Code correctly (see page 36).

•Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system.

•The answering system may not detect the Remote Access Code while your announcement is playing. Try waiting until the announce- ment is over before entering the code.

•There may be noise or interference on the phone line you are using. Press dial-pad buttons firmly.

Announcement message is not clear

•When you record your announcement, make sure you speak in a normal tone of voice, about 9 inches from the base.

•Make sure there is no “background” noise (TV, music, etc.) while you are recording.

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents GHz Cordless Speakerphone/ Answering System 1477/1177 See Table of contents GHz Cordless Speakerphone/ Answering System 1477/1177Quick reference guide Stored in Speed Dialing memory Call Waiting is activatedPress to enter Speed Dialing program Press to redial last number calledParts checklist Power adapter Battery pack Belt clip Telephone line cordTelephone base Before you begin About Caller IdentificationTelephone operating range Telephone base installation Plug telephone line cordInto telephone jack Battery installation & charging Battery LOWWall mounting Install belt clip as shown below if desired Belt clip & optional headsetSet date and time Customizing your telephoneRinger DATE/TIMEChoose language Choose dial modeDial Mode Tone Language ENGBase Speakerphone calls Making and answering callsHandset calls Speed dialing & directory dialingWay conference calls Call waiting Options while on callsCaller ID Handset Only Ring silencing Handset OnlyMute Base Only To adjust listening volumeVolume Temporary tone dialingIntercom calls Handset locator & intercomHandset locator Hold paging for 3-way conference callsSpeed dialing handset Error tonesDirectory dialing handset Speed dialingbaseSpeed dialing To enter a Speed Dial number BaseHandset To call, change or delete a Speed Dial number Select to change or delete the number seeEntering names into directory To search alphabetically Directory name searchTo browse through the directory To call a displayed numberTo edit a listing To move, edit or delete a listingTo move a listing To delete a listingHow Caller ID works PAT JohnsonDisplay screen messages To return a call To review your call logTo review your call log Other optionsExample To dial a call log entryDialing options #TwiceTo delete all call log entries To delete call log entriesTo delete a single call log entry Call log clearedEdit number as desired To add entries to phone directoryEdit name as desired Entry added to phone directoryPress to adjust playback volume Message capacityTo check day and time Day and time announcementsTo set day and time Press until correct minute is spokenTo delete your outgoing announcement Outgoing announcementsTo record your outgoing announcement Elapsed recording time secondsAnnounce Only mode To turn Announce Only on or offOption selected Changing feature options Feature optionsOptions during playback Message playbackAnnouncements To delete all messagesTo play back a memo Recording and playing memosTo record a memo Speak into microphone MicrophoneMessage window displays Message window displaysRemote access Display screen messages, lights and tones ConnectingCONNECTING... The handset is waiting for a dial tone Screen display messagesIndicator lights Alert tonesCase of difficulty Not work at allIf you lose a call Index Index Technical specifications Remote access wallet card Cut along dotted lineFold card here 91-005677-031-000.ATT1477.RO.qxd 2/13/1950 721 PM

1477 specifications

AT&T 1477 is a comprehensive cloud management and analytics platform designed to enhance the operational efficiency of telecommunication networks. It is tailored specifically for service providers seeking to optimize their network performance while delivering exceptional user experiences. With its robust suite of features, AT&T 1477 allows carriers to manage their infrastructure more effectively, ensuring continuous service availability and minimal downtime.

One of the standout characteristics of AT&T 1477 is its advanced data analytics capabilities. The platform leverages big data technologies to collect, analyze, and interpret vast amounts of network data in real time. This enables service providers to gain actionable insights into network performance, user behavior, and traffic patterns. By utilizing machine learning algorithms, AT&T 1477 can predict network issues before they escalate, allowing for proactive maintenance and optimized resource allocation.

Additionally, AT&T 1477 is built on an open architecture, which facilitates seamless integration with existing operations support systems (OSS) and business support systems (BSS). This interoperability guarantees that service providers can implement the platform without the need for extensive infrastructure overhauls. Furthermore, the cloud-native design provides scalability, allowing operators to adjust resources based on demand fluctuations efficiently.

The platform also supports various technologies, including Wi-Fi, LTE, and 5G, making it versatile for different network environments. This multi-technology support ensures that service providers can effectively manage diverse service offerings while retaining a unified approach to network management.

Moreover, AT&T 1477 emphasizes security and compliance. The platform includes built-in security features that safeguard sensitive data and protect against cyber threats. This commitment to security is critical in today’s landscape, where data breaches can compromise customer trust.

In addition to its technical capabilities, AT&T 1477 offers user-friendly interfaces and dashboards that simplify data visualization for end-users. Service providers can easily track key performance indicators and make informed decisions that enhance service quality.

In conclusion, AT&T 1477 is a powerful tool for service providers looking to optimize their operations through advanced analytics, integrated technologies, and robust security measures. Its ability to deliver real-time insights and support diverse network architectures positions it as a leading solution in the telecommunications industry.
Top Page Image Contents