SonicWALL 8000 manual Rack Installation Instructions

Page 33

￿￿￿

Rack Installation Instructions

Review the documentation that comes with your rack cabinet for safety and cabling information. Before installing your server in a rack cabinet, review the following guidelines:

vMake sure that the room air temperature is below 35°C (95°F).

vDo not block any air vents; usually, 15 cm (6 in.) of air space in the rear and 5 cm (2 in.) in the front provides proper airflow.

vPlan the device installation starting at the bottom of the rack cabinet.

vInstall the heaviest device in the bottom of the rack cabinet.

vDo not extend more than one device out of the rack cabinet at the same time.

vRemove the rack doors and side panels to provide easier access during installation.

vConnect the server to a properly grounded outlet.

vDo not overload the power outlet when installing multiple devices in the rack cabinet.

vThe slide rails in this kit come preset to the correct length for installation in an IBM rack cabinet, and they are adjustable for other rack cabinets.

vThe slide rails are marked (RIGHT/FRONT and LEFT/FRONT) for proper placement on the rack-cabinet flanges.

This symbol identifies a Caution statement. Always read the information that accompanies this symbol before you proceed with the installation.

Safety Information, Statement 4

Use safe practices when lifting.

≥18 kg (39.7 lb)

≥32 kg (70.5 lb)

≥55 kg (121.2 lb)

 

Rack Safety Information, Statement 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not place any objects on top of a rack-mounted device unless that rack-mounted device is intended for use as a shelf.

This server does not require any tools for the installation procedure unless you are shipping the server in the rack cabinet. If you are shipping the server in the rack cabinet, you need a Phillips screwdriver. The following illustration shows the items that you need for installing the server in a rack cabinet. If any items are missing or damaged, contact your place of purchase.

Page 32

Page 32 Page 34
Image 33
Page 32 Page 34
Contents SonicWALL Email Security Getting Started Guide SonicWALL Email Security Getting Started Guide Contents Check Package Contents Before You BeginAny Items Missing? What You Need to Begin Record Configuration InformationNetworking Information SonicWALL Email Security Appliance Overview of the SonicWALL Email Security ApplianceBefore You Register Registering Your SonicWALL Email Security AppliancePage Registering Your SonicWALL Email Security Appliance Initial Setup and Configuration Apply Power to the SonicWALL Email Security ApplianceConnect Directly to the SonicWALL Email Security Appliance Login to the SonicWALL Email Security Appliance Monitoring Initial System ConfigurationHostname and Networking Date and Time Activating the Email Security License Subscriptions Page Connecting and Configuring Network Settings SonicWALL Email Security Interface Using Quick Configuration to Set Up Email Management Change the Default Administrator PasswordThis option does not restrict incoming email to any domain Click Apply Changes Routing Mail to Your SonicWALL Email Security Appliance Verification and Further ConfigurationSecurity appliance Configuring Outbound Mail Filtering SonicWALL Email Security 8000 Getting Started Guide Example Configuring a Static IP Address TroubleshootingSafety Regulatory Statement and Safety InstructionsSonicWALL Email Security 8000 Getting Started Guide Page SonicWALL Email Security 8000 Getting Started Guide Rack Installation Instructions SonicWALL Email Security 8000 Getting Started Guide Server 1P P/N 25K9195 Copyright Notice SonicWALL GPL Source Code TrademarksSonicWALL, Inc
Top Page Image Contents