Ricoh TRC-239 owner manual Using Vehicle Battery Power

Page 10

21-1628.fm Page 10 Tuesday, January 25, 2000 9:30 AM

might be available are: municipal curbside collection, drop-off boxes at retailers such as your local Ra- dioShack store, recycling collection centers, and mail-back programs.

USING VEHICLE BATTERY POWER

You can power the TRC-239 from a vehicle’s 12V power source (such as cigarette-lighter socket) using a fused DC power cord that ends in a size M Adapta- plug® adapter (neither supplied). Both are available at your local RadioShack store.

Cautions:

You must use a power source that

!supplies 13.8 volts (12-volt nominal) at 1300 mA. Its center tip must be set to

positive and its plug must fit the TRC-239's POWER jack. Using a power source that does not meet these specifications could damage the TRC-239 or the power cord.

Always connect the fused power cord to the TRC-239 before you connect it to the power source. When you finish, disconnect the fused power cord from the power source before you disconnect it from the TRC-239.

If batteries are installed, make sure NI/AL inside the battery compartment is set to the correct position (see “Using Batteries” on Page 7).

10

Image 10
Contents TRC-239 Features Fm Page 3 Tuesday, January 25, 2000 930 AM FCC Information Contents Using the Power Jack and NI/AL Switch Powering the CBPreparation Using Batteries Using Non-Rechargeable BatteriesUsing Rechargeable Batteries Charging Tips Using Vehicle Battery Power Using AC Power Connecting the Antenna Connecting an Optional Antenna Fm Page 14 Tuesday, January 25, 2000 930 AM Operation Receiving Transmissions and Adjusting SquelchTransmitting Fm Page 16 Tuesday, January 25, 2000 930 AM Business Uses CB Operation TipsTypical Uses for a CB Radio Personal UsesCB Courtesy Using Common 10-CODES Code MeaningFm Page 20 Tuesday, January 25, 2000 930 AM Maximum Range Care and Maintenance Specifications ReceiverLimited Ninety-Day Warranty