TROUBLESHOOTING
| Problem |
| Remedy |
|
|
| |
1. | The display stays blank after you have | • Check that the AC adapter is connected | |
| turned on the machine. |
| correctly. |
|
| • If you are using batteries, check that | |
|
|
| they are correctly inserted. |
|
| • If the batteries are low, replace them | |
|
|
| with new ones. |
|
|
| |
2. | The machine does not print or the | • Check that the tape cassette has been | |
| printed characters are blurred. |
| inserted properly. |
|
| • If the tape cassette is empty, replace it | |
|
|
| with a new one. |
|
| • Make sure that the tape compartment | |
|
|
| cover has been closed. |
|
|
| |
3. | The text files that you stored in the | If the batteries are low, replace them with | |
| memory are no longer there. | new ones. | |
|
|
| |
4. | The printed characters are not formed | If you are using batteries, they may be low. | |
| properly. | Try using the AC adapter or replace the | |
|
| batteries with new ones. | |
|
|
| |
5. | A blank horizontal line appears | Clean the print head as explained on page | |
| through the printed label. | 8. |
|
|
|
| |
6. | Striped tape appears. | You have reached the end of the tape. | |
|
| Replace the tape cassette with a new one. | |
|
|
| |
7. | The machine has “locked up” (i.e., | Turn off the machine, and then while hold- | |
| nothing happens when a key is | ing down f and R, press b to turn | |
| pressed, even though the machine is | the machine back on. | |
| on.) | ||
| Finally, release f and R. | ||
|
| ||
|
| ☞ | The text and formats in the display |
|
|
| and all text files stored in the mem- |
|
|
| ory are erased. |
|
|
|
|
31