View the Call List, Registration, Set the Time

6 CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed to the Calling Line Identification service with your network service provider. Your phone can store up to 10 received calls with date/time information in the Call List. The number will be shown on the handset display when the phone is ringing. If the number matches with one of the entries in your Private Phonebook, the caller's name stored in the private phonebook will be displayed alternately with the number, and the handset will ring with the ringtone associated with that phonebook entry.

If the call is from someone who withheld their number, e.g. by dialling 141,

“WITHHELD” will display.

If the call is from someone whose number is unavailable, e.g. an international call or from a private exchange, “OUT OF AREA” will display.

If you've got new Caller Display records, the handset will display "X NEW CALLS" in standby mode. The New Calls indication will remain until all the new call records have been viewed.

6.1View the Call List

All received calls are saved in the Call List with the latest call at the top of the list. When the call list is full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed are marked with a <*> icon at the centre of the bottom line of the display.

1. Press <UP> to access the call list.

OR Press <MENU/OK> to show CALL LIST and then press <MENU/OK>.

2.Press <UP/DOWN> to select the desired entry.

3.Press <#> to view the caller’s number if applicable.

4.Press <MENU/OK>, <UP/DOWN> to show DETAILS, and then <MENU/OK> to display the date and time of the call. Press <MENU/OK> to go back to the previous screen.

6.2Store a Call List Number into the Phonebook 1. Follow Steps 1 and 2 in Section 6.1 .

2. Press <MENU/OK> and <UP/DOWN> to show ADD TO PB.

3. Press <MENU/OK> and then enter the name.

4. Press <MENU/OK> and the selected call list number is displayed.

5. Edit the number if necessary.

6. Press <MENU/OK> and <UP/DOWN> to select the ringtone.

7. Press <MENU/OK> to store the phonebook entry and return to the calls list.

6.3Delete an entry in the Call List

1.Follow Steps 1 and 2 in Section 6.1 .

2.Press <MENU/OK> and <UP/DOWN> to select DELETE.

3.Press <MENU/OK> to confirm.

7.5Registration

IMPORTANT: When you purchase a phone system, all handsets are already registered to your base, so you do not need to register them.

Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.

You can register additional handsets to have up to five handsets per base unit, with each handset's number (1 to 5) shown on its display. (Note: each handset can only be registered to one base.)

To register a new handset to your base:

1.Press and hold <FIND> on the base station for more than five seconds, to put the base station into registration mode. It will stay in registration mode for about 1 minute, so the following handset sequence must be completed within this time.

2.Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.

3.Press <MENU/OK> to display PIN?---- .

4.Enter the 4-digit system PIN (default 0000).

5.Press <MENU/OK> to confirm, and the display will show SEARCHING.

If the handset registration is successful, you will hear a confirmation tone and the <antenna icon> will stop flashing.

The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handsetregistration is unsuccessful, the <antenna icon> will still flash and the display will return to REGISTER, so you will need to repeat the registration process.

7.6Reset Your Phone

You can reset your phone to the default settings . After a reset, all your personal settings, call list entries, redial list entries, and answering machine messages will be deleted but your phonebook remains unchanged.

1.Press <MENU/OK> and <UP/DOWN> to select DEFAULT.

2.Press <MENU/OK> to display PIN?---- .

3.Enter the 4-digit system PIN (default 0000).

4.Press <MENU/OK> to display CONFIRM?

5.Press <MENU/OK> to confirm, and the phone will be reset to its default settings.

6.4Delete all Call list entries

1.Follow Steps 1 and 2 in Section 6.1.

2.Press <MENU/OK> and <UP/DOWN>. to select DELETE ALL.

3.Press <MENU/OK> to display <CONFIRM?>.

4.Press <MENU/OK> to confirm. All entries will be deleted and the display will show <EMPTY>.

7 PHONE SETTINGS

Your phone comes with a selection of settings that you can change to personalise your phone the way you like it to work.

7.1Date and Time Settings

If you subscribe to Caller Display the time and date settings will be automatically updated by the network when you receive an incoming call.

The Caller Display service only sends the month and date, not the year, so you may need to set the year.

7.1.1Change the Date Format

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3.Press <MENU/OK> to show DATE FORMAT.

4.Press <MENU/OK> and <UP/DOWN> to select your desired date format (DD-MM-YYor MM-DD-YY).

5.Press <MENU/OK> to confirm.

7.1.2Change the Time Format

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3.Press <MENU/OK> and <UP/DOWN> to select TIME FORMAT.

4.Press <MENU/OK> and <UP/DOWN> to select your desired time format (12 HR or 24 HR).

5.Press <MENU/OK> to confirm.

7.1.3Set the Time

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3.Press <MENU/OK> and <UP/DOWN> to select SET TIME.

4.Press <MENU/OK> and then enter the time information in 24 hour format.

5.Press <MENU/OK> to confirm.

Note: If the time has been set before, the current time will display, otherwise, “HH:MM” will display.

8ANSWERING MACHINE

Your phone includes a telephone answering machine that records unanswered calls when it is on.The answering machine can store up to 59 messages within the maximum recording time of approximately 15 minutes. As well as recording incoming messages,you can record memos for other users of your phone.

If the answering machine memory is full, the Handset will display TAM FULL alternately with the handsets name or time, depending on the handset standby display mode set (see section 7.3.7), and you will have to delete some messages before any new ones can be recorded.

Some answering machine functions can be operated from the base, including playing messages and turning the answering machine on or off. See section "3.2 Base Station with Telephone Answering Machine (TAM) Control" for further details of button operations.

The answering machine can also be controlled and set up using the handset menu functions, as below.

8.1Turn On/Off the Answering Machine

You can turn the answering machine on or off using the handset.

When the answering machine is set to ON, calls will be answered after the

set answer delay and the caller can then leave you a message.

When the answering machine is set to OFF, calls will be answered after 14

rings and the answer only message will be played to your callers. They will not be able to leave you a message.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM ON/OFF.

3.Press <MENU/OK> and <UP/DOWN> to select ON or OFF.

4.Press <MENU/OK> to confirm.

¾If answering machine is set to ON, <TAM ON icon> displays on the handset LCD.

¾If answering machine is set to OFF, <TAM ON icon> will not display on the handset LCD.

8.2Listen to the Messages in the Answering Machine

When new messages are recorded on the answering machine, the <TAM icon> flashes on the handset display until all the new messages are played.

After a new message is played it will be saved as an old message automatically unless it is deleted.

Old messages will be played after all new messages are played completely.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> to showt MSG PLAYBACK.

3.Press <MENU/OK> to start message playback through the earpiece and the screen displays the date and time information of the message received.

7.1.4Set the Date

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.

3.Press <MENU/OK> and <UP/DOWN> to select SET DATE.

4.Press <MENU/OK> and then enter the date information. in the format you set in Section 7.1.1.

5.Press <MENU/OK> to confirm.

Note: If the date has been set before, the current date will display, otherwise, “DD-MM-YY” will display.

7.2Alarm Settings

You can set an alarm time on this phone. When an alarm is set, the <ALARM lcon> is shown on the handset display.When the alarm time is reached, the <ALARM icon> and “ALARM ON ” flash on the handset display, and the alarm tone rings for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. You can also press and hold <TALK OFF> while the alarm is sounding, to stop the alarm and turn off the snooze function.

Note:

a.A key press will still disable the alarm even if the handset keypad is locked when the alarm rings.

b.The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level.

c.During an external call or internal call, if an alarm is set and when the alarm time is reached, the <ALARM icon> and “ALARM ON” will still flash. An alarm tone will be emitted from the earpiece to alert the user the alarm time is reached. Once the user presses any key or presses and holds.

<TALK OFF> to disable the alarm, the display will revert to the call duration.

d.During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of the snooze period.

7.2.1Turn on/off the Alarm

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> to show ALARM.

3.Press <MENU/OK> and <UP/DOWN> to select ON/OFF.

4.Press <MENU/OK> to confirm.

Note: If ON is selected, you will be asked to set the alarm time.

7.2.2Set the Alarm Time (If Alarm time is set to be ON) 1. Follow Steps 1 to 4 in Section 7.2.1.

2. Enter the alarm time in 24 hour format.

3. Press <OK> to display "SNOOZE".

4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <OK> to confirm.

Note: A <STAR icon> is placed at the centre of the bottom of the handset display to indicate that it is a new message.

When a message has been played, the <STAR icon> will disappear and will

not be shown when you listen to this message again.

Note: If there are no messages, the handset display will briefly show "00-0000-00"then return to MSG PLAYBACK.

4.During message playback, press <UP> or <DOWN> to increase or decrease the message playback volume respectively.

5.Press <MENU/OK> and <UP/DOWN> to select STOP, FORWARD, PREVIOUS, DELETE to perform the following functions during message playback.

STOP: Stop the current message playback and return to the ANS. MACHINE menu.

FORWARD: Skip to play the next message. The date and time information of the next message will display if there is another message.

PREVIOUS: Repeat playing the current message from the beginning. The date and time information of the current message will display. DELETE: Delete the current message and the next message will be played.

Note: Alternatively, you can use the following shortcut keys to control different operations during message playback.

Press <Key 5> to stop message playback.

Press <Key 4> once to restart the current message from the beginning. Press

twice to skip backward to play the previous message.

Press <Key 6> to skip forward to play the next message.

Press <Key 2> to delete the current message being played.

8.3Delete All Messages in the Answering Machine

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.

3.Press <MENU/OK> to display CONFIRM?

4.Press <MENU/OK> to delete all old messages.

Note: If there are no more messages in the answering machine, "EMPTY "will display and return back to ANS. MACHINE menu.

7.3Handset Settings

7.3.1Set the Ringer Melody for Internal Calls

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS .

2.Press <MENU/OK> and <UP/DOWN> to select RING SETUP

3.Press <MENU/OK> to show INT RING.

4.Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear for internal calls.

Note: The respective melody will be played while browsing the ringtone list. 5. Press <MENU/OK> to confirm.

7.3.2Set the Ringer Melody for External Calls

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select RING SETUP.

3.Press <MENU/OK> and <UP/DOWN> to select EXT RING.

4.Press <MENU/OK> and <UP/DOWN> to select the melody you want to hear for external calls.

Note: The respective melody will be played while browsing the ringtone list. 5. Press <MENU/OK> to confirm.

7.3.3Set the Ringer Volume

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select RING SETUP.

3.Press <MENU/OK> and <UP/DOWN> to select RING VOLUME.

4.Press <MENU/OK> and <UP/DOWN> to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection. If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.

5. Press <MENU/OK> to confirm.

7.3.4Set Alert Tones

Three different alert tones are set on by default, but can be turned off, if desired. Key Tone - a single beep is emitted when you press a key.

Low Battery Tone - emitted while you are talking on the phone to alert you that you need to charge the handset batteries.

Out of Range Tone - emitted while you are talking on the phone to alert you to move closer to the base unit, before the call is lost.

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select TONE SETUP.

3.Press <MENU/OK> and <UP/DOWN> to select KEY TONE /

BATTERY TONE / OUT OF RANGE.

4.Press <MENU/OK> and <UP/DOWN> to turn on or off these tones.

5.Press <MENU/OK> to confirm.

8.4Record Memo

You can record your memo message for another user. When you record a memo, the message can be played back in the same way as answering machine messages. Memo recording can still function even when the answering machine

is turned off.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select MEMO.

3.Press <MENU/OK> to start memo recording and “RECORDING ” is displayed.

4.Press <MENU/OK> to stop memo recording. The memo will play back for

you to check. Press <MENU/OK> or leave the memo to finish playing, to save the message.

4.Press <C/MUTE> to stop memo recording without saving and return back to

ANS. MACHINE menu.

8.5Answering Machine Settings

You can use the TAM SETTINGS menu through the handset to change the settings of your answering machine.

8.5.1Set the Answer Mode

By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which does not allow callers to leave a message. In that case, your callers will be prompted to call back later.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> to show ANSWER MODE.

4.Press <MENU/OK> and <UP/DOWN> to select ANS & REC or

ANSWER ONLY.

5.Press <MENU/OK> to confirm.

When your answering machine memory is full and the answer mode is in ANS

&REC,the answer mode will change to ANSWER ONLY automatically.

It will return to ANS & REC mode automatically after some messages have been deleted.

8.5.2Set the Outgoing Message (OGM) Language

The answering machine announces the outgoing message when it answers a call. There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY

mode, which can only be in English or French (Francais) on this model.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select TAM LANGUAGE.

4.Press <MENU/OK> and <UP/DOWN> to select your desired OGM language.

5.Press <MENU/OK> to confirm.

7.3.5Set the Handset Language

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select LANGUAGE.

3.Press <MENU/OK> and <UP/DOWN> to select the desired language.

4.Press <MENU/OK> to confirm.

7.3.6Rename the Handset

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS

2.Press <MENU/OK> and <UP/DOWN> to select RENAME HS.

3.Press <MENU/OK> and change the name of your handset, using <C/MUTE> to delete letters and the alphanumeric keys to enter up to 10 letters for the name.

4.Press <MENU/OK> to confirm.

7 .3.7 Choose the Information to be Displayed in Idle

You can choose to display time or handset name in your idle screen.

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select HS DISPLAY.

3.Press <MENU/OK> and <UP/DOWN> to select HANDSET NAME or TIME.

4.Press <MENU/OK> to confirm.

7.3.8Set the Auto Answer

If you turn on the Auto Answer, you can answer a call automatically by just lifting the handset off the base or charger, without having to press any key.

1.Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select AUTO ANSWER.

3.Press <MENU/OK> and <UP/DOWN> to turn on or off the auto answer feature.

4.Press <MENU/OK> to confirm.

7.4Base Settings

7.4.1De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced.

You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to de-register a handset from the base station.A de-registered handset will have the antenna icon flashing and "REGISTER" on the display.

Note: You cannot de-register the handset that you are currently using.

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DELETE HS.

3.Press <MENU/OK> and the display shows "PIN?----".

4.Enter the 4-digit system PIN.

5.Press <MENU/OK> and the first handset number is displayed.

6.Press <UP/DOWN> to scroll through the list of registered handsets and select the number of the handset you want to de-register.

7.Press <MENU/OK> to confirm, and the chosen handset will be de-registered.

8.5.3Record Your Own Outgoing Message (OGM)

You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When you record your own OGM, it will be used when the answering machine

answers the call. If your personal OGM is deleted, the pre-set OGM will be restored automatically.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

4.Press <MENU/OK> and <UP/DOWN> to select ANS & REC or

ANSWER ONLY.

5.Press <MENU/OK> and <UP/DOWN> to select RECORD MESS.

6.Press <MENU/OK> to start recording your personal OGM and “RECORDING” is displayed on the screen.

7.Press <MENU/OK> to stop and save your personal OGM. Your newly saved

OGM will playback automatically.

Alternatively, press <C/MUTE> to return to the previous screen without saving the personal OGM.

8.5.4Playback and Delete the Outgoing Message (OGM)

You can playback your own personal OGM or the pre-set OGM for ANS & REC mode or ANSWER ONLY mode and choose to delete your personal OGM during playback and record a new one whenever you want.

Please note that pre-set OGM cannot be deleted.

8.5.4.1Playback the OGM

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.

4.Press <MENU/OK> and <UP/DOWN> to select ANS & REC or

ANSWER ONLY.

5.Press <MENU/OK> and <UP/DOWN> to select PLAYBACK.

6.Press <MENU/OK> to playback your current OGM and "PLAYING OGM" is displayed on the screen.

7.Press <MENU/OK> to stop the OGM playback and return to the previous menu.

Note: If a personal OGM has not been recorded, the pre-set OGM will be played.

8.5.4.2Delete a Personalised OGM

1. Repeat Steps 1 to 6 in Section 8.5.4.1

2. Press <C/MUTE> while the OGM is playing to delete your personal OGM and return to the previous menu and the pre-set OGM is restored automatically.

Note: If the pre-set OGM is playing, you are not allowed to delete it, so pressing <C/MUTE> will just stop the playback and return to the previous menu.

7.4.2Change the dial mode

You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognises PULSE dialling.

Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling for the rest of that call.

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select DIAL MODE.

3.Press <MENU/OK> and <UP/DOWN> to select TONE or PULSE (The current setting is indicated by an asterisk to the right).

4.Press <MENU/OK> to confirm.

7.4.3Change the Flash (Recall) Time

You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG (600ms).

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.

3.Press <MENU/OK> and <UP/DOWN> to select your desired flash time

(SHORT, MEDIUM, LONG, with the current setting indicated by and asterisk to the right).

4.Press <MENU/OK> to confirm.

7.4.4Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorized use. The default system PIN code is 0000.

1.Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.

2.Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

3.Press <MENU/OK> and the display shows PIN? ---- .

4.Enter the old system PIN.

5.Press <MENU/OK> to display NEW PIN?---- , and enter your new 4-digit system PIN.

6.Press <MENU/OK> to display CONFIRM?---- , and enter your new 4-digit system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <MENU/OK> to confirm

8.5.5Set the Answer Delay

You can set the number of rings before the answering machine answers and starts playing your OGM. You can set the answering machine to answer after

two to eight rings or TIME SAVER. If Time Saver is set the answering machine will answer after 4 rings if there are no new messages, or after 2 rings if there is a new message, so if you call in and you don't get an answer after 2 or 3 rings, you can hang up and save on call charges.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select ANSWER DELAY.

4.Press <MENU/OK> and <UP/DOWN> to select from 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER.

5.Press <MENU/OK> to confirm.

8.5.6Set the Recording Time of Incoming Message

You can set the maximum length of the recording time for each incoming

message to be 60, 120, 180 seconds or unlimited up to the total recording time remaining on the answer machine.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.

4.Press <MENU/OK> and <UP/DOWN> to select from 60 S, 120 S, 180 S or

UNLIMITED.

5.Press <MENU/OK> to confirm.

8.5.7Call Screening

When the answering machine is on and takes a call, you can listen to the caller leaving a message. You can then identify the caller and decide whether to take the call in person.

If the answering machine is set to ON, when there is an incoming message, it will automatically be played through the base station, but you also have the option to listen through the handset which will display “SCREENING?”

1.Press <MENU/OK> to start call screening. Any handset can listen to who is leaving the message and decide whether to pick up the call or not.

2.The handset will display “SCREENING”.

3.You can adjust the earpiece volume by pressing <UP or DOWN>.

3. Press <C/MUTE> to return to previous screen and you cannot hear the recording.

At any time if you want to pick up the call, you can press <TALK ON> and the message recording will be stopped automatically. If the answering machine is in the process of recording, the message already stored will be saved.

9	7 8	5 6	4	2	Keys
Turn off	Turn on	Play the		While
the answering machine	the answering machine	messageStop the current message playback Skip to play the next message	Repeat playing the current message from the beginning. Press twice to skip backward to play the previous message.	message is not playing While message is playing Delete the current message playing.	Functions

		29

8.5.8Change the Compression Rate

Three different compression rates (HIGH, MEDIUM and LOW) are provided for you to select different quality levels of recording incoming message. The lower the compression rate, the higher the recording quality level attained, but the shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10 minutes, HIGH=15 minutes approx).

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select COMPRESSION.

4.Press <MENU/OK> and <UP/DOWN> to select your desired compression rate.

5.Press <MENU/OK> to confirm.

8.5.9Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering machine, by calling the answering machine when you are away from

home and then dialling a 4-digit remote access PIN from a tone-dialling phone. The 4-digit remote access PIN code is used to prevent other people from unauthorised access of your answering machine.

8.5.9.1Change the 4-Digit Remote Access PIN

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.

4.Press <MENU/OK> to display PIN? ----, and then enter the current PIN (Default 0000).

5.Press <MENU/OK> to display NEW PIN? ----, and then enter your new 4-digit PIN code.

6.Press <MENU/OK> to display CONFIRM? ----, and then enter your new 4-digit PIN code again.

7.Press <MENU/OK> to confirm the new PIN.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again.

8.5.9.2Activate or Deactivate the Remote Access

To allow remote access this option must be turned ON, but you can turn it OFF to prevent any remote access at all.

1.Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2.Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.

3.Press <MENU/OK> and <UP/DOWN> to select REMOTE ACC.

4.Press <MENU/OK> and <UP/DOWN> to select ON or OFF to turn the remote access on or off respectively.

5.Press <MENU/OK> to confirm.

8.5.9.3Access Your Answering Machine Remotely

You can ring your phone from another tone-dialling phone to switch the answering machine on or off, and/or listen to your messages remotely.

1.Place a call from a tone-dialling phone to your phone.

2.When the answering machine answers the call and starts playing the OGM, press the < * > key. The OGM will stop playing.

3.Enter the 4-digit Remote Access PIN (default PIN is 0000).

You will hear a single confirmation beep if the PIN is accepted, and you then need to press 5 to start playing any messages.

Note: The * must be entered while the OGM is still playing, and the 4-digit PIN should be follow without any delays.

Note: If the 4-digit Remote Access PIN is entered incorrectly you will hear three error beeps, and you can try again, but if it happens three times.

consecutively, the line will be released automatically.

4. Press the following keys to carry out your desired function.

.H\V		)XQFWLRQV
.H\V	:KLOHPHVVDJHLVQRWSOD\LQJ	:KLOHPHVVDJHLVSOD\LQJ
		'HOHWHWKHFXUUHQWPHVVDJHSOD\ing
		5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH
		IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS
		EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH
	3OD\WKHPHVVDJH	6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
		6NLSWRSOD\WKHQH[WPHVVDJH
	7XUQRQWKHDQVZHULQJPDFKLQH
		6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
	7XUQRIIWKHDQVZHULQJPDFKLQH

Note: If your answering machine is switched off, the phone will enter into the

remote access mode after 14 rings and play the Answer Only OGM.

You can then enter the <KEY *> and the 4-digit remote access PIN (Default)

Remote Access PIN is 0000) to activate the remote access feature.

When your answering machine memory is full and the answer mode is set to Answer & Record, the answer mode will change to Answer Only automatically. It will change back to Answer & Record mode automatically after some messages have been deleted.

9	TROUBLESHOOTING
Problem		Causes	Solutions
No dialling tone when		a.The connection cord of	a.Check the connections. Unplug
No dialling tone when		the base station is not	and plug back in the mains.
pressing <TALK ON> key		the base station is not	and plug back in the mains.
pressing <TALK ON> key		plugged in.	Check that the telephone cord
		plugged in.	Check that the telephone cord
		b.The adapter cord is not	has been plugged into the base
		b.The adapter cord is not	station and the phone socket.
		plugged in correctly in	station and the phone socket.
		plugged in correctly in	b.Check the base station plug and
		the base station.	b.Check the base station plug and
		the base station.	the 230V plug (remove and plug-in).
		c. Another handset is using	the 230V plug (remove and plug-in).
		c. Another handset is using	c.Wait until the line is unoccupied.
		the base to make a call.	c.Wait until the line is unoccupied.
		the base to make a call.	d.Use the original telephone line
		d. Wrong telephone line cord	cord supplied
When connect to a PBX,		Dialling prefix is needed.	Insert the dialling prefix
no and/or wrong connection
after dialling.
"SEARCHING" is displayed.		a. Base station out of	Reduce the range.
		range.	Connect base station to
		b. Base station not	mains.
		connected to mains.
The call does not work.		Service not activated or	Check your Subscription with
The call does not work.		wrong setting	network or change the dial mode.

No display.		Empty battery	Recharge battery
Answering Machine
The unit does not record		The answering machine is	Turn on the answering machine.
new messages.		turned off.	Turn on the answering machine.
new messages.		turned off.
The caller cannot leave a		a. The answering machine	a. Turn on the answering machine.
message.		is turned off.	b. Erase unnecessary messages.
		b. Message memory is full.	c. Change to ANS & REC mode.
		c. ANSWER ONLY mode is set.	c. Change to ANS & REC mode.

I cannot operate the		a. You are entering the	a. If you forget the remote access
I cannot operate the		wrong remote access code	code, reset to the default settings.
answering machine		wrong remote access code	code, reset to the default settings.
answering machine		b. You are pressing the dial	b. Press each key firmly.
remotely.		b. You are pressing the dial	b. Press each key firmly.
remotely.		keys too quickly.	c. Try again using a touch tone phone
		c. You are using a pulse
		telephone.
While recording an outgoing		A call is being received.	Answer the incoming call
message or listening to			and try again to record your
messages, the unit rings			out going message later.
and recording stops.

This telephone is not equipped with a grounding function, and therefore some of the functions may be limited when used in PBX systems.

Technical Support

If the fault persists...

Disconnect all other instruments connected to the same line as the phone system and try to make a call.

Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket.

Try making a call. If this works, the line is OK.

If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty.

10 DECLARATION OF CONFORMITY

We the manufacturer / Importer : Binatone Telecom Plc,1 Apsley Way London, NW2 7HF. Declare under our sole responsibility that the following product

Type of equipment:	Digital cordless telephone
Model Name:	Veva 1520 Series
Country of Origin:	China
Brand:	Binatone

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive 2004/108/EC on the approximation of the laws of the Member

Statesrelating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety.

Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard:

Radio Spectrum:	EN 301406: V2.1.1(2009-07)
EMC:	EN 301489-6:V1.3.1(2008-08)
	EN 301489-1:V1.8.1(2008-04)
Electrical Safety:	EN 60950-1:2006+A1: 2009
Manufacturer / Importer		5 Dec 2010
(signature of authorized person)		Date	Signature

The conformity to the requirements is validated by the symbol.

NOTE: In compliance withDirective 2002/96/EC, when you purchase a product that comes with the symbol shown on the right, you are required to dispose of electrical and electronic equipment by separate waste collection and you cannot dispose of the product as normal waste.

This equipment and all its components, subsystems and consumable materials formed an integral part of this product and when you decide to dispose

of them you have to takethem to a local recycling centre for appropriate waste disposal, in compliance with the current regulations.

Details about the location of these centres can be obtained from your local authority.

Notes for battery disposal

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste.

Please be aware of the local rules on separate collection of batteries. The correct disposal of batteries helps protect the environment and prevent health hazards.

11 PRODUCT GUARANTEE

This product is guaranteed against manufacturing defects for a period of 1 Year. This does not cover the product where the fault is due to misuse, abuse,

use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use.

In the event of a problem with the product within the guarantee period please return it to your nearest Argos store.If the item is shown to have had an inherent defect present at the time of sale, the store will provide you with

a replacement.

Your statutory rights remain unaffected.

Guarantor; Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

UK (Argos) Ver, Sep.2010

6 CALLER DISPLAY (NETWORK DEPENDENT)

6.1View the Call List

6.3Delete an entry in the Call List

7.5Registration

7.6Reset Your Phone

6.4Delete all Call list entries

7 PHONE SETTINGS

7.1Date and Time Settings

7.1.1Change the Date Format

7.1.2Change the Time Format

7.1.3Set the Time

8ANSWERING MACHINE

8.1Turn On/Off the Answering Machine

8.2Listen to the Messages in the Answering Machine

7.1.4Set the Date

7.2Alarm Settings

7.2.1Turn on/off the Alarm

8.3Delete All Messages in the Answering Machine

7.3Handset Settings

7.3.1Set the Ringer Melody for Internal Calls

7.3.2Set the Ringer Melody for External Calls

7.3.3Set the Ringer Volume

7.3.4Set Alert Tones

BATTERY TONE / OUT OF RANGE.

8.4Record Memo

ANS. MACHINE menu.

8.5Answering Machine Settings

8.5.1Set the Answer Mode

ANSWER ONLY.

8.5.2Set the Outgoing Message (OGM) Language

7.3.5Set the Handset Language

7.3.6Rename the Handset

7 .3.7 Choose the Information to be Displayed in Idle

7.3.8Set the Auto Answer

7.4Base Settings

7.4.1De-register a Handset

8.5.3Record Your Own Outgoing Message (OGM)

8.5.4Playback and Delete the Outgoing Message (OGM)

8.5.4.1Playback the OGM

8.5.4.2Delete a Personalised OGM

1. Repeat Steps 1 to 6 in Section 8.5.4.1

7.4.2Change the dial mode

7.4.3Change the Flash (Recall) Time

7.4.4Change the System PIN Code

8.5.5Set the Answer Delay

8.5.6Set the Recording Time of Incoming Message

8.5.7Call Screening

Keys

While

Functions

8.5.8Change the Compression Rate

8.5.9Activate Remote Access

8.5.9.1Change the 4-Digit Remote Access PIN

8.5.9.2Activate or Deactivate the Remote Access

8.5.9.3Access Your Answering Machine Remotely

:KLOHPHVVDJHLVSOD\LQJ

3OD\WKHPHVVDJH

TROUBLESHOOTING

Problem

Causes

Solutions

Answering Machine

Technical Support

If the fault persists...

10 DECLARATION OF CONFORMITY

EMC:

The conformity to the requirements is validated by the symbol.

11 PRODUCT GUARANTEE