9.Never push objects of any kind into this product through casing slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
10.Never spill liquid of any kind on the product.
11.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
12.Avoid using telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightening.
13.Do not use the telephone to report a gas leak in the vicinity of the leak.
Installation & Operation
Component List
Your expandable handset system consists of an A50E HANDSET, CHARGER UNIT, BELT CLIP, (3) AAA NiMH RECHARGEABLE BATTERIES, AC ADAPTER AND OWNER’S MANUAL.
Setup Of The A50E Expandable Handset
1.No phone jack required.
2.Choose a location for the charger near an electrical outlet.
3.Plug the AC adapter into an electrical outlet and charger unit.
4.Install the (3) AAA NiMH batteries provided, as described below.
Installation Of Batteries In Handset
(Diagram #1) – Installing the batteries
1.Remove battery compartment cover by sliding it downwards.
2.Install new batteries. Be sure to observe battery polarity as imprinted on the base of the compartment (See diagram #1).
3.Replace the battery compartment cover by sliding upward until it clicks into place.