INSTALLATION
For Table/Desk and Wall Installation
1 Plug the coiled cord into the jack on the base. Plug the other end into the handset, then hang up.
2Lift the handset and listen for a dial tone. If you can’t hear a dial tone, see IN CASE OF DIFFICULTY.
Coiled cord 
3 Set the Dial Mode switch on the handset to TT if you have tone dialing service or to DP if you have dial pulse (rotary) service.
Dial Mode switch
Your phone will work immediately after installation using the default feature settings (see Feature Settings Summary on next page).
NOTE: If you subscribe to Caller ID services from your local telephone service provider, you must follow the instructions in “Set Home Area Code” on page 9 for your phone to properly recognize and dial calls, and you may need to follow the instructions in “Set Local Area Codes” on page 10.
7