Setting up Your
Dialogue
Desktop Use
1.Connect the telephone line cord and the handset cord to the telephone as shown in Figure 4.
Figure 4 - Connecting the Components
2.Plug the AC adapter into an electric outlet and into the tele- phone as shown in Figure 4.
3.Lift the handset and listen for a dial tone.
The phone is ready to use.
Wall Mount
1.Pull the handset hook out as shown in Figure 5 and reverse its position so that the hook points up and will hold the handset when you hang up.
2.Insert the tabs of the phone base into the slots in the lower position of the base as shown in Figure 6. Push the phone base in and down firmly until it snaps into place.
MANUAL
AUTO
Figure 6 - Phone Base for Wall Mounting
3.Plug in the short phone line cord and mount the phone as shown in Figure 7.
Figure 7 - Wall mounting installation
4.See Desktop Use section and follow steps 1 through 3.
Figure 5 - Reversing the Hook | 5 |