To answer a call waiting tone, putting your present call on hold
1Press [ FLASH ] [recall dial tone]
2Dial Hold code
●You are connected to waiting call
To return to held call
1Complete present call and hang up
●Held call sends
2Lift handset
●You are connected to held call
CONFERENCE | [ ✔ ] |
To add a third party to a call
1Press [ FLASH ] [recall dial tone]
●Present call is put on hold
2Dial number of third party
do not need to answer or place another call), press
[ HOLD ] on your telephone. When you want to return to the held call, press [ HOLD ] again. See “Hold” in the section titled Phone Features.
Version Note: If you are using System 75, Version 1, use the following directions:
To put a call on hold
1 Press [ FLASH ] [recall dial tone]
3 | Press [ FLASH ] |
| |
|
| ● All parties are now connected |
|
To drop a third party |
| ||
1 | Press [ FLASH ] |
| |
|
| ● You remain connected to original party |
|
|
|
| |
| DROP (for 8102 and 8110 Users) | [ ] | |
To disconnect from a normal call, or to drop the last party added to a conference call
1Press the button you have programmed as [ DROP ]
HOLD (with Second Dial Tone) | [ ✔ ] |
Note: The following feature allows you to place or answer another call or activate another feature while you have a call on hold. If you want merely to put a call on hold while you are busy with another task (and
5
To complete call 2 and return to call 1
1After party on call 2 hangs up, press [ FLASH ] twice
●Call 1 is reconnected
Version Note: If you are using System 75, Version 2, Version 3, or DEFINITY Generic 1, use the following
directions:
To put a call on hold
1Press [ FLASH ] [recall dial tone]
2 Dial Hold code [dial tone]
Note: If you hang up, held call sends a
To return to held call
Hang up, receive
To put call 1 on hold and place call 2
1Press [ FLASH ] [recall dial tone]
2 Dial Hold code |
| [dial tone] |
●Call 1 is put on hold
6