AT&T MLS-Series manual Calling Features, Auto Dial Numbers

Calling Features

To use these features on an MLS-18D, MLS-12D, or MLS-12 phone, press the calling feature button. To use on an MLS-6, MLC-6, MDC 9000, or MDW 9000 phone, press [ Feature ] plus the 2-digit code.

	How to Use			How to Use on
Feature	on MLS-6,		MLS-18D, MLS-12D,					Description
	MLC-6, MDC 9000,			and MLS-12
	or MDW 9000
Privacy	Not Available			Press	[ Privacy ]			Prevents other people with the
				Press again to turn off				same line from joining your
								calls. A steady green light next
								to [ Privacy ] shows that Privacy
								is on.
Last Number	Press [ Feature ] [ 0 ] [ 5 ]			Press	[	Last Num	]	Redials the last outside num-
Redial								ber you dialed. Useful for
								redialing a busy number.
Recall	Press [ Feature ] [	0 ] [ 3 ]		Press	[ Recall ]			“Recalls” a dial tone. If you are
								not on a PBX or Centrex, use
								Recall to end a call without
								hanging up–you will get a dial
								tone and can then make
								another call. Othenvise, use
								Recall to get the PBX/Centrex
								dial tone.
Conference	Press [ Feature ] [ 0 ] [ 6 ]			Press [ Drop ]				Drops the last party added to a
Drop								conference call.

Auto Dial Numbers

To store an extension number or outside number for one-touch dialing:

1.Press [ Feature ] [ 0 ] [ 0 ].

2.Press a programmable Auto Dial button (see p. 3).

3.Press left [ Intercom ] and dial the extension number, or dial the telephone number up to 20 digits, including special functions, see box below.

(To set up an Auto Dial button for group paging, press [ Intercom ] [ ✶ ] [ 7 ]; for Music Access, press [Intercom ] [ 1 ] [ 5 ].)

4.To store additional Auto Dial numbers, repeat Steps 2 and 3.

5.Press [ Feature ] [ 0 ] [ 0 ] when you are done.

To insert a...	Press...
Pause (1.5 seconds)	[ Hold ]
Recall	[ Spkr ]
Stop	[ Mic ]
Touch-Tone Enable	[ Transfer ]

6