Panasonic SC-HT928 specifications Front and surround speaker assembly, Attach the pipe to the base

Page 4

	Simple setup	Make sure you have all the indicated components before starting assembly, setup, and

	STEP1	connection.		2 front and	4 large washer 4 mounting plates
		4 bases	4 pipes	2 front and	4 large washer 4 mounting plates
		4 bases	4 pipes	2 surround	screws
				speaker units
					8 small screws
					8 small screws

Front and surround speaker assembly

[Note]

The front and surround speaker pairs as well as the pipe pairs are different.

–Check the label on the rear of the speaker before attaching the pipe (‹page 6).

–The pipe with the shorter cable is for the front speaker unit.

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For assembly, use a Phillips-head screwdriver.

2Attach plate A to the speaker.

Ensure that plate A is fastened on straight by lightly tightening the top and bottom screws alternately until fully tightened.

Small screws

Speaker

Plate A

Polyfoam

Front and surround speaker assembly

RQT7436

4

1 Attach the pipe to the base.

1Thread the speaker cable through the base.

Lessen excess speaker cable.

		Thread the
	Cable	speaker cable
	Cable	through here.
		through here.
		Hole for screw

Groove

2Insert the pipe.

Insert the pipe while gently pulling on the speaker cable.

3Secure the pipe to the

	base.	Rear side of base
	base.
	Ensure the screw is	Large
	securely fastened.	washer
	securely fastened.	screw
		screw
		Cable

The supplied stands are specially designed for attachment to Panasonic SB-PF921 front speakers and SB-PS921 surround speakers. Only use as indicated in this setup.

2 Attach the stands to the front and surround speakers.

≥There is no difference between the right and left speakers and stands. ≥Using the polyfoam included with this unit may be convenient.

1 Remove the screw and separate the mounting plate into two parts.

Plate B Plate A

Small screw

You can also attach to the upper rear of the speaker.

The height of the speaker is indicated in the diagram

(‹ page 5) when attaching plate A to the upper rear or lower rear of the speaker.

3Place the pipe on plate A and attach plate B.

Plate B	Rotate the pipe so that the flat
	side is facing away from the
	back of the speaker.

Fit the offset into the slot and slide plate B into the locked position.

Plate B

Offset

Slot

4Secure the plate with the same screw removed in procedure 1.

Small screw

Image 4

Contents Operating Instructions DVD Home Theater Sound SystemThis Unit is Intended for USE in Tropical Climates For Australia, N.Z. and RussiaThis Unit is Intended for USE in Moderate Climates Back of productAccessories How to replace the fuseFor Saudi Arabia and Kuwait GS area code models onlyAttach the pipe to the base Front and surround speaker assemblyAttach the stands to the front and surround speakers Adjust the speaker height Front and surround speaker assemblyConnect the speaker cables Fasten the speaker cable to the baseLocating LocatingConnecting speakers with the subwoofer Connecting speakers with the subwooferSpeaker cable ≥4-m cable For center speaker Speaker-cable stickerVideo connections Video connectionsRadio and system connection/The remote control Remote controlRadio and system connection Control reference guide Quick Setup screen assists you to make necessary settingsSee reference pages in brackets Main unit and disc caution Discs that can be playedDiscs that can be played/Main unit and disc caution Basic play Basic playCD Mode Disc menuPlay Return toConvenient functions Repeat play All group, random and program playRepeat play All group, random and program playUsing navigation menus Playing data discsPlaying HighMATTM discs Playing the programs Playing a play listPlaying HighMATTM discs Playing the programs Playing a play listUsing on-screen menus Other SettingsUsing on-screen Main MenuUsing on-screen menus Changing the player settings Player settingsDisc tab Video tabChanging the delay time Speaker Setting Changing the player settingsAudio tab Display tabAutomatic presetting Selecting the preset channelsRadio Press and hold MemoryManual tuning RDS broadcastingOptional antenna connections Press RDS to display the text dataSound field and sound quality Sound Field ControlCenter Focus Super SurroundSpeaker level adjustments Speaker level adjustmentsMulti Rear Surround MRS Virtual Rear Surround VRSDown-mixing Subwoofer levelCustom Sound Memory Down-mixing Custom Sound MemorySleep timer Using headphonesOther functions MutingOperating other equipment Connection exampleEquipment Operating otherOperating the tape deck or satellite receiver Operating the television and the video cassette recorderOperating other equipment Other speaker setup options Safety precautions MaintenanceGlossary Language code listGlossary Specifications SpecificationsDimensions WtHtD Input power IECPower supply Power consumptionTroubleshooting guide Troubleshooting guidePicture abnormal or un-viewable Progressive videoListening to the radio Television operationF0304YM0