AT&T CL84250 user manual Battery installation and charging, Step

Page 13

Getting started

Battery installation and charging

Install the cordless handset battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the handset charger to charge the battery. For best performance, keep the handset in the handset charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 91 for battery operating times.

If the screen shows Place in charger, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators and actions to take.

Battery indicators

Battery status

Action

 

 

 

The screen is blank or shows

Battery has no or very

Charge without interruption until

Place in charger.

little charge. The handset

the screen shows Low battery or

 

cannot be used.

HANDSET X (at least 30 minutes).

 

 

 

The screen shows

Battery has enough charge

Charge without interruption until

Low battery and flashes.

to be used for a short time.

the screen shows HANDSET X

 

 

(at least 30 minutes).

 

 

 

The screen shows

Battery is charged.

To keep the battery charged,

HANDSET X.

 

place it in the handset charger

 

 

when not in use.

 

 

 

NOTE: If you are on a phone call in low battery mode, you hear four short beeps every minute.

Step 1

Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated.

Step 2

Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s manual Congratulations Parts checklist Table of contents Multiple handset use Index Quick reference guide handset QCID/-VOLUMEMain menu Flash MENU/SELECT Quick reference guide telephone baseAvoid placing the telephone base too close to Installation800 222-3111. In Canada, dial 1 866 Telephone base installationCharger installation Step Battery installation and chargingCharge light Step Tabletop to wall mount installation Installation optionsInstallation options Wall mount to tabletop installation Press to Release Menu settings Handset settingsRinger volume Ringer toneTo manually turn off the new voicemail indicators on Voicemail visual message waiting indicatorMENU/SELECT. The screen shows Turn off indicator? LCD LanguageSet date/time Key toneUse caller ID to automatically set date and time To set the dial mode on a cordless handset Dial modeHome area code To set the home area code on a cordless handsetWebsite Announcement Answering system settings handset onlyTo play your current outgoing announcement To record a new outgoing announcementAnswer on/off To delete your outgoing announcementANS on icon Call screening To change the settingNumber of rings To set the number of ringsTo change the remote access code Remote access codeMessage alert tone Telephone base settings To select a language on the telephone base Use q/CID or p/DIR to scroll to Clr voicemail Turn off indicator?Press q/CID or p/DIR to scroll to Set date/time To set the home area code on the telephone base To set the dial mode on the telephone base Using the telephone base Making a call Using a cordless handsetOn hook dialing predialing Using a cordless handset Making, answering, and ending callsTemporary ringer silencing Ending a call Using a cordless handsetAuto off ClearspeakTM dial-in-base speakerphonePress REDIAL/PAUSE RedialExiting the menu Equalizer Handset operationOptions while on calls To access the caller ID history call log while on a call To access the directory while on a callTo access the redial list while on a call To end mute a call on the telephone baseTemporary tone dialing Handset locator Multiple handset useTo start the paging tone To stop the paging toneIntercom Answer an incoming call during an intercom call Base is callingCall transfer using intercom Outside call Shared directory About the directoryCapacity Create directory entries To create a new directory entry Using a cordless handsetDial key Robert Brown To add a predialed telephone number to the directory To review directory entries Review directoryTo search by name Search directoryDisplay dial To dial a displayed number from the directory To dial, delete or edit entriesTo delete an entry To edit an entryPress MENU/SELECT to confirm. There is a confirmation tone Information about caller ID with call waiting About caller IDCaller ID history Missed new calls indicatorHow the caller ID history call log works XX Missed callsMemory match Caller ID operationTo review the caller ID history View dialing options Delete entries Dial a call log entrySave a call log entry to the directory Caller ID operation On-screen Reason Message Reasons for missing caller ID informationAnswering system and voicemail About the answering systemAnswering system new message indication XX New messagesMessage capacity Turn the answering system on or off at the telephone baseVoice prompts Call intercept Call screening at the telephone baseBase ringer Temporarily turn off the message alert toneMessage playback When messages are playing on the telephone baseTo listen to messages at the telephone base Options during playbackTo delete all old messages When messages are playing on the cordless handsetTo delete all old messages on the telephone base To delete all old messages on a cordless handsetRecording and playing memos To record a memo Using a cordless handsetTo play back a memo Message counter displays Base message counter displaysRemote commands Remote accessTo remotely reach your answering system Remote access Expansion handset To register a handset to your telephone base Adding and registering handsetsShows 1.Press HS LOC on base 4sec and 2.Then press # Deregistering a handset Handset screen icons Alert tones and lightsHandset alert tones Telephone base iconsLights Telephone base tonesScreen display messages Handset and telephone base display screen messagesIntercom to Handset and telephone base display screen messages My telephone doesn’t work at all TroubleshootingCannot get a dial tone Cannot dial outBatteries do not hold a charge My cordless handset isn’t performing normallyHear other calls while using my phone Experience poor sound quality when using the speakerphoneTelephone does not ring when there is an incoming call My calls cut in and out while I’m using my cordless handset Charge light is off or blinking System does not receive caller ID when on a callMy caller ID isn’t working Incomplete messagesSystem does not answer after the correct number of rings System does not respond to remote commandsSystem does not record messages Cannot retrieve voicemail messages Outgoing announcement is not clearCommon cure for electronic equipment Cleaning your telephone MaintenanceTaking care of your telephone Avoid waterSafety information Important safety informationEspecially about cordless telephones Industry Canada FCC Part 68 and ActaFCC Part What does this limited warranty cover? Limited warrantyHow do you get warranty service? Operation Operating time Technical specificationsIndex Index Action Remote command Remote access wallet cardClearspeakTM is a trademark of Advanced American Telephones

CL84250 specifications

The AT&T CL84250 is a cutting-edge cordless telephone system designed to meet the communication needs of modern households and businesses. With its sleek design and advanced features, this device makes staying connected easier and more efficient than ever.

One of the standout features of the CL84250 is its DECT 6.0 technology. This digital enhanced cordless technology provides superior sound quality, enhanced range, and minimal interference from other wireless devices. This ensures clear conversations, free from disruptions, allowing users to communicate without any hassles.

The CL84250 also boasts an impressive range of up to 1,000 feet outdoors and 300 feet indoors, making it ideal for larger spaces. Whether you are in the backyard or across the house, you can enjoy the freedom to move while still staying connected. The ergonomic design of the handset makes it comfortable to hold, and the large keypad and illuminated display make dialing and reading information easier, even in low light conditions.

Another notable characteristic of the AT&T CL84250 is its answering system. The phone features a digital answering machine with up to 22 minutes of recording time. This is a significant convenience for users who may not always be able to answer their calls. You can easily access your messages and use the skip or repeat functions to navigate through them efficiently.

The phone also includes an intercom feature, allowing communication between handsets without ringing on the line. This is especially useful in multi-room settings, making it easier to coordinate household activities or communicate with colleagues in an office environment.

In terms of additional features, the CL84250 has a caller ID function that stores up to 50 names and numbers, helping you keep track of important calls. The phone supports multi-handset capability, allowing users to expand their system to multiple units for larger coverage throughout a home or office.

The AT&T CL84250 is also energy efficient, designed with low power consumption in mind. Its rechargeable eco-friendly batteries ensure extended usage without frequent recharges, promoting sustainability.

In conclusion, the AT&T CL84250 combines advanced technology with user-friendly features to create a reliable and versatile communication device. With its strong range, exceptional sound quality, and added functionalities, it is an ideal choice for anyone looking to elevate their phone experience. Whether for home or business, the CL84250 stands out as an exemplary cordless telephone solution.
Top Page Image Contents