T E L E P H O N E
Light is on when phone line is in use
Store a pause in a memory dial number
Dial numbers
in telephone memory
Store numbers in telephone memory
Temporary Tone
Microphone
M E M O R Y
When light goes on, battery needs replacement
Access telephone subscriber services
Put caller on Hold
Mute handset and speakerphone microphone
Redial last number called
Adjust Handset/ Speakerphone volume while on a call
Turn speakerphone on or off
The telephone can store nine telephone numbers, each up to 24 digits long. A number remains stored in memory unless you change it by storing a new number in its place.
NOTE: You may choose to store emergency numbers in memory locations. This feature is provided only as a convenience and the manufacturer assumes no responsibility for customer reliance upon the memory feature.
Storing Memory Numbers
1Press and release G.
2Enter a telephone number (up to 24 digits). To store a switchhook flash, press Fin the appropriate place while entering the number. To store a dialing pause, press pin the appropriate place while entering the number.
3Press and release Y.
4Press and release the memory location (1 to 9) where the number is to be stored. You cannot use 0, #or * as memory locations.
If you hear five beeps when storing a number in memory, the number you have entered was more than 24 digits long. Repeat Steps
Dialing Memory Numbers
1Lift the handset or press K.
2Press and release Y.
3Press and release the memory location (1 to 9).
Storing Numbers Just Dialed
1Press and release G.
2Press and release R.
3Press and release Y.
4Press and release the memory location (1 to 9) where the number is to be stored.
5