Using Your Remote
If Your Remote Control Cannot Find a Working Three-
Digit Code in the Tables (Scanning)
If you try to program your remote control using the
1.Turn on the TV.
2.Press the TV key for at least three seconds or until the LED blinks.
3.The following steps explain how to "scan" through the TV codes
stored in your remote control using the | keys. The LED will not be | ||
lit while the | keys are pressed. |
|
|
- While pointing the remote control at your TV press the | arrow key to | ||
scan upward to the next code. Use the | arrow key to return to the | ||
previous code. |
|
| |
- If the transmitted code is the correct one, your TV will turn off, | |||
responding as if its POWER key were pressed. |
| ||
- If your TV does not respond, press the | arrow key to try the next | ||
code. When your TV turns on or off as a result of the transmitted code, | |||
you will know that you have found the correct code. |
|
- When youLhave found the correct codeL$#(power to your TV#is toggled on or off), press the ENTER key. This will store the manufacturer’s code. The LED will then flash rapidly several times and turn off.
NOTE: If your TV is not listed in the tables and/or the codes for your brand are not accepted by the remote, you will need to use the remote originally manufactured for your unit.
DSR470 User Guide | 25 |