Test
The Test feature allows you to test the lights on your telephone and the display, if the telephone has one.
To test the lights and display on the telephone
1. While
The lights go on steadily, and, if your telephone has a display, all the display segments fill in.
2. To end test, release Trnsfr .
Lights return to normal operation.
Note: If the display or the lights do not respond during the test, notify your system manager.
Transfer
The Transfer feature allows you to transfer a call from your telephone to another extension or outside number.
To send the present call to another extension
1.Press Trnsfr .
2.Dial the number to which the call is to be transferred.
3.Remain on the line and announce the call. (If the line is busy or if there is no answer, you can return to the held call by pressing and then releasing the switchhook.)
4. | Press Trnsfr again to complete the transfer. |
5. | Hang up. |
Note: If your telephone is connected to DEFINITY Release 6.3.2 or a later release, your administrator may have chosen
To cancel an attempted transfer, press and release the switchhook or press Feature and then the dial pad key on which the Drop feature is administered.
Getting Messages
Message
Your Message light goes on when a caller has left a message for you.
For directions on retrieving your messages, see your system manager.
5