Furuno FM-2710 manual Installation, Unpacking and Inspection, Equipment Supplied

Page 11

2. Installation

2-1. Unpacking and Inspection

Carefully unpack the unit from the shipping carton to avoid damaging the contents.

It is also recommended to keep the carton and the packing materials. In an unlikely case that the unit has to be returned to the factory, the original packing materials should be used.

2-2. Equipment Supplied

Description

VHF Radiotelephone

DC power cable

Mounting bracket with screw knobs

Truss tapping screw set

Mic hanger set

Operator s manual

Spare fuse

Image 11

Contents Page First Edition NOV Safety Information for the Operator Only qualified personnel should work inside the equip- ment Table of Contents Introduction Features of the Furuno FM-2710 General SpecificationsReceiver Transmitter Equipment Supplied InstallationUnpacking and Inspection Transceiver Location Transceiver Mounting Methods Mounting The TransceiverPage Electrical Connections Electrical ConnectionsPower Connection Antenna Connection Soldering the M-type connector Controls and Indications Operation16 Key Volume ControlPower on/offControls Channel Selector Selects channels Squelch Control25/DIM Key WX Key Weather channel receiving modeAll Key INT Key International and USA channelsPTT Switch Push-To-Talk DW Key Dual Watch modeIndications Page Receiving Operating ProcedureDual Watch Mode Is displayed momenarilly once in 5 seconds Transmitting Page Rules and Manners General Notes on Operating Marine VHFPage Communication Distance Cleaning of Transceiver MaintenanceAntenna System Check Minor Troubleshooting TroubleshootingPower setting is LOW Set it to HI USA Ship Tx Ship Rx Type of Operation AppendixVHF Marine Channel Frequencies Ship Tx Ship Rx Type of Operation Ship Rx Type of Operation USA VersionPort Operations Receive Freq VHF Weather Channel Frequencies