Operation after making DSC call
Voice communication is started. After completion of communica- tion, the display changes as shown in (1) or (2) below depending on how voice communication terminated.
(1)When you end voice communication by pressing the [CAN- CEL] key or hanging the handset on the hanger of the VHF, the display of the
PSTN CALL
Display 1
Working channel
* Call in progress *
END OF CALL
Transmits “End of call” command.
* Waiting for end call ack * AUTO RELAY in 2 sec
Counts down.
•If “End call ack” is not received within two seconds;
•If “End call ack” is received;
* Call in progress *
AUTO RETRY
* Waiting for end call ack * 2 sec to go
•If “End call ack” is receiver;
•If not received;
*End call not received * No charge information
(No charge time information)
*Received * END OF CALL Charge time:
Charge time appears.