Adjusting Your Telephone Ring, Volume | Fujitsu 280D-HS instruction

Adjusting Your Telephone Ring

&Pitch (using the blue buttons)

Volume:

With your phone ON the hook, dial

#136

Your phone will begin to ring Use the blue UP and DOWN arrow keys to adjust to the required level

Press SPKR to save.

Pitch (this will adjust the tune of your phone ring to differentiate it from other phones in your area)

With your phone on the hook, dial

#136 Press 2

Use the blue UP and DOWN arrow keys to adjust to the required pitch

Press SPKR to save.

Note: Ensure that you have the “Headset Only” button turned off when using this feature

Using a HEADSET

Connect your headset to the socket underneath your digital phone (labelled

#2 port – picture of a headset)

Press the “HEADSET ONLY” button. The light will go red to indicate that you are in “headset mode”

Place the handset on the hook. You are now free to use BOTH the handset receiver and the headset to make or answer calls.

To make an outgoing call via your headset:

Dial out directly from the telephone keypad (include 0 as usual if this is an outside call)

You will hear and speak via your headset.

To answer a call via your headset: Press the SPKR button to answer a call. The SPKR and LINE button will go red.

To disconnect from a call via your headset

Press the SPKR button while active on a call. The SPKR and LINE buttons will go out.

To Go From Headset to Handset

To go from headset to handset during a Call. Lift the handset.

You can now hear the caller through both the headset and handset.

To go From Handset to Headset ONLY Press the TOGGLE Handsfree” button Return the handset to the cradle Your SPKR and LINE buttons will remain lit.

You will now only hear the caller through your headset.

Using Hands-free (when you have a headset attached)

Turn off the “HEADSET ONLY” button. The light will go out.

You can now make hands-free calls by dialling directly from the keypad.

To answer a call hands-free, press the SPKR button.

You are free to lift the handset at any time, however, to go back to hands- free, you must press the “TOGGLE Handsfree” button before hanging up the handset to continue the call hands- free.

If you do not press the “TOGGLE Handsfree” button first, then…your call will be disconnected.

Note: You cannot turn on the headset button or use your headset while on a hands-free call. You cannot go to speaker mode (hands-free) while engaged on a headset call.

Coral Flexicom Digital

Telephone

ADFA

Fujitsu 280D-HS manual Adjusting Your Telephone Ring, Volume, #136 Press