Quick Start
1.Plug the power supply into the back of the FastForward device and insert into an electrical outlet. WARNING: Do not plug the FastForward power connector directly into your handset.
This could potentially damage your handset.
2.Place the device on a convenient flat surface with good wireless coverage.
3.Create a new phone book entry in your mobile phone with the name “Cf1”
see page 7 for complete instructions.
4.In the Cf1 entry location, store the phone number for the location to which you would like incoming mobile calls forwarded.
–If you are setting up at home, use your home number or a distinctive ring number. (In order for distinctive ring feature to properly work, the distinctive ring number must be programmed into your phone book as the phone number you would like to forward to.)
5.Place the Cf Selector Switch, located on the bottom of the device, into the Cf1 position.
6.The phone must be turned on for call forwarding to work.
That’s it! Your FastForward is now ready for use.
2
To Start Call Forwarding:
-Simply insert your phone into the FastForward device.
-The Forward indicator on the device will illuminate indicating your incoming wireless calls are now forwarded.
NOTE: Any unanswered FastForward call will be treated as a normal landline call is treated today.
To Cancel Call Forwarding:
-Press the Cancel button on the front of the FastForward device.
-The Forward indicator will extinguish after several seconds.
-You may now remove your mobile phone. (In order for the FastForward device to work properly, the handset should
be turned on and not engaged with an active call when placed on the FastForward device or while canceling call forward.)
3