Battery Information

Your BRAVO PLUS pager is designed to operate with a single AA-size alkaline battery.

Installing/Replacing the Battery

	DIAGRAM
	(+)
LOCK	(–)
	(–)
BATTERY DOOR

•Locate the ribbed lock on the bottom of the pager. Slide the lock toward the back cover to expose the red marking.

•While pressing on the recess of the battery door, slide the door in the direction of the arrow until it pops up from the housing.

•Align the battery so the polarity markings (+ and -) match the markings on the back cover. Insert the battery.

•Align the semicircle on the battery door with the semicircle on the bottom of the pager near the word “LOCK”Press. down on the end of the door nearest the battery and slide the battery door until it is completely closed.

•After the cover is closed, slide the lock toward the front of the pager to conceal the red marking.

Low-Battery Indicator

When the battery nears the end of its life, the standby screen is replaced with lo cell. The battery must be re- placed within a few days to avoid interruption of pager op- eration.