Setting the Alert Mode

The alert can be set as either audible or silent.

➊Press ç to display the function menu.

➋ Press Š to move the cursor to ƒ or Î.

The ƒ symbol is displayed if the pager is in the silent alert mode (prompting you to enter the audible mode, if desired). The Îsymbol is displayed if the pager is in the audible alert mode (prompting you to enter the silent mode, if desired).

➌Press ç to select the desired alert mode.

If the selected mode is audible (ƒ), your pager emits a short chirp. If the selected mode is silent (Î) and your pager is equipped with a vibrator, your pager vibrates.

Setting the Alert Pattern

NOTE: The pager must be in the audible alert mode to select the alert pattern.

Your pager has a standard alert (1), seven different pleas- ing alerts (2 through 8), and a chirping alert (Í), allowing you to select and change the alert.You can also select no alert (Î).

To change your alert:

➊Press ç to display the function menu.

➋Press Š to move the cursor to é, then press ç.

➌ Press Š or ‹ to move the cursor to the desired alert.

The pager gives a sample of each alert when scrolling through the selections.

➍ Press ç to activate the alert.