Motorola Gold FLX manual Setting the Alarm, To set the alarm for a specific time and date

Setting the Alarm

The alarm on your pager can be set for a specific time and date, or it can be used as a daily alarm.

To set the alarm for a specific time and date:

➊Press ç to display the function menu.

➋ Press Š to move the cursor to „.

➌ Press ç to display the set-time-and-alarm screen. ➍ Press to move the cursor to ….

„22:23™05/06/96 ●Ì0:00™--/--/--●

SET ALARM

Example of Set-Time-and-Alarm Screen

The alarm symbol defines the alarm status—either alarm enabled (c) or alarm disabled (Ì).

➎Press ‹ to move the cursor to ….

➏ Press or to enable or disable the alarm.

➐Press ‹ to move the cursor to the hour digit.

➑Repeat the process for each entry (minute, AM/PM, and date).

➒Press ç to activate your selection. The … symbol is shown on the display.

At the selected time, your pager emits a 12-second audible alert even if the pager is in the silent mode.

To set the alarm to alert daily:

Follow the steps previously described, except when setting the date, press for the date entries until you see a blank month, day, and year (--/--/--). The alarm is now set to alert every day at this specified time.

NOTE: If the alarm expires without being acknowl- edged, the … symbol flashes until any button is pressed.

NOTE: To exit from any menu without making changes, press è.

8