Startt rt Hereere, Connect the Scanner | 321 Studios 1660 instruction

EPSON Perfection® 1660 Photo

Startt rt Hereere

2	Install the Software

Wait! You must install your software before connecting the scanner to your computer. The install process may take up to 15 minutes.

Be sure to close all open programs and turn off any virus protection programs.

Windows®

1Insert the scanner software CD-ROM in the CD-ROM or DVD drive. The installer starts automatically.

If it doesn’t start, open My Computer, double-click EPSON, then double-click EPSON.

2When you see a message asking you to disable antivirus software, click Continue.

3Read the license agreement, then click Agree.

4At the Software Installation screen, click Install.

Macintosh®

1Insert the scanner software CD-ROM in the CD-ROM or DVD drive. (If necessary, double-click the EPSON CD-ROM icon to open it.)

2Double-click .

3When you see a message asking you to disable antivirus software, click OK.

4Read the license agreement, then click Agree.

5When the Software Installation screen appears, click Install.

Click Install

You see the EPSON TWAIN 5 Installer:

Click install

3 Connect the Scanner

After your software is installed, it’s time to get connected!

1Remove the yellow sticker from the back of the scanner.

Remove the yellow sticker

2 Connect the cable for the built-in transparency unit to the connector on the back of the scanner.

3	Slide the transportation lock all
	the way to the right.	Transportation
		Transportation
		lock
4	Connect the power	AC adapter
	cord and AC adapter,

as shown.

Power cord

1	Unpack Your Scanner

1Make sure you have everything:

Built-in transparency unit

AC adapter

Scanner

Power cord

CD-ROM with EPSON® TWAIN driver, software, and electronic manuals

USB cable

Film holder

See your on-screen Scanner Reference Guide for instructions on scanning slides and negatives.

2Remove all the packing tape, but leave the yellow sticker in place for now.

IMPORTANT!

Leave the yellow sticker in place until you’re instructed to remove it.

Click Install

5Follow the on-screen instructions to install each program. After each one is installed, click Next or Finish to continue. Note that EPSON Smart Panel™ installs in several steps. If you have PDA software on your computer, Presto! PixExpress will be installed.

Please wait until the process is complete.

6When you see this message, click Yes or No:

You see this screen:

Click Exit

NOTE: Presto! PixExpress will not be installed if you don’t have PDA software on your computer. If you add it later, you can install Presto! PixExpress. See your on-screen Scanner Reference Guide for instructions.

7Click Exit. The EPSON Product Registration screen appears.

8Register your scanner as instructed. At the last screen, click Done or close your browser. Then follow the instructions in section 3 to connect the scanner.

6Click Install.

When the EPSON TWAIN installation is complete, click Restart. Don’t remove your CD-ROM. After your Macintosh restarts, you can install the rest of your software.

7When your Macintosh restarts, double-click the EPSON CD-ROM icon to open it, if necessary, then double-click . You see this screen:

Click Install

8Click Install and follow the on-screen instructions to install each program. After each one is installed, click Quit to continue.

Note that EPSON Smart Panel installs in several steps. If you have PDA software on your computer, Presto! PixExpress will be installed.

9When you see this message, click Yes or No:

You see this screen:

Click Exit

10Click Exit. The EPSON Product Registration screen appears.

11Register your scanner as instructed. At the last screen, click Done or close your browser. Then follow the instructions in section 3 to connect the scanner.

5 Connect the AC adapter to the scanner.

AC adapter

6 Plug the other end of the power cord into an electrical outlet.

Start button

The scanner turns on and begins

to warm up. The Start button on the front of the scanner flashes. It stops flashing and turns green when the scanner is ready.

7 Plug the square end of the USB cable into the scanner’s USB port.

8Plug the flat end of the cable into any available USB port on your computer.

NOTE: Your system may not work correctly if you use a USB cable other than the one supplied by EPSON or if you connect to your computer through a hub.

Now you’re ready to start scanning!

Turn this sheet over for step-by-step instructions.

Turn Over