Installation in an RTS Digital Matrix

CHAPTER 2

Installation

Installation in an RTS Digital Matrix

IFB-828 Location

The XLR connector output from the IFB-828 provides unbalanced audio and DC operating power to IFB belt packs. Therefore, very long cable runs (over several hundred feet) from the IFB-828 to the belt packs may result in diminished performance due to DC resistance in the cabling and noise induced by surrounding equipment. Select a location for the IFB-828 that is as close as possible to the belt packs or use appropriate precautions (shielded cable, heavier gauge stranded wire, routing away from unsaddled equipment, etc.)

NOTE: For broadcast applications, you typically locate the IFB-828 in the audio booth near the talent location, and no special precautions are required.

To install an IFB-828 in an RTS Digital Matrix, do the following:

1.Mount the IFB-828in an equipment rack or bay. It should be positioned near eye height when sitting or standing to permit adjustment of the IFB program levels and to check the power indicator lights. There are no special ventilation requirements.

2.Set the voltage selector switch on the back panel:

•Select 110 for 110/120V, 50/60Hz operation

•Select 220 for 220/240V, 50/60Hz operation

3.Connect a 25-pair telco cable to J9 on the back of the IFB-828. Run this cable back to the audio distribution point for the intercom system (punch blocks, etc.).

4.Setup IFBs at the digital matrix intercom system using the intercom system configuration software.

5.In AZedit, select the IFB icon on the AZedit toolbar.

6.Double-click an IFB resource. The Edit IFB window appears.

7.Configure the IFB ports, as needed.

8.Once you have configured the required IFBs, assign the IFBs to keypanel keys.

NOTE: For keypanel setup information, see the AZedit User Manual (p/n 93507769000).

9.For each IFB that you setup, do the following:

•Connect the output port from the matrix (that you defined in step 4) to an available IFB input of the IFB-828. Make the connections at the audio distribution point where you have connected the cable from J9 of the IFB-828. See Table 1 on page 6 for pin numbers.

IFB-828 specifications

The RTS IFB-828 is a state-of-the-art intercom system designed to meet the demanding needs of professional audio and broadcast environments. It stands out for its remarkable versatility and robust performance, making it an ideal choice for live events, television studios, theaters, and other settings where reliable communication is essential.

One of the key features of the IFB-828 is its comprehensive support for multiple audio channels. The system allows for up to eight independent intercom channels, enabling seamless communication among all personnel involved in production. This capability is crucial for coordinating activities among different departments, especially in complex live events where timing and coordination are everything.

The IFB-828 employs advanced digital signal processing technology, ensuring that audio transmission is crystal clear and free from interference. This technology enhances voice intelligibility, even in noisy environments, making it easier for users to communicate effectively. Additionally, the system supports various audio formats, ensuring compatibility with different broadcast standards and equipment.

Another notable characteristic of the IFB-828 is its user-friendly interface. The system features an intuitive layout with easy-to-navigate controls, allowing users to adjust settings quickly without getting distracted from their primary tasks. The device is designed to be operable by personnel with varying levels of technical expertise, making it accessible to all team members.

To enhance versatility, the IFB-828 comes equipped with a range of connectivity options. It supports both wired and wireless intercom setups, enabling flexible installation based on specific operational requirements. The ability to interface with other equipment, such as radios and mobile devices, further extends its functionality.

The system is built with durability in mind. Constructed from high-quality materials, the IFB-828 is designed to withstand the rigors of daily use in demanding environments. Its compact form factor also makes it easy to integrate into existing setups without requiring significant space.

In summary, the RTS IFB-828 is a leading-edge intercom solution characterized by its multi-channel capability, advanced digital audio processing, user-friendly design, flexible connectivity options, and robust construction. These features position it as a reliable choice for professionals seeking a superior intercom system for their broadcasting and event production needs.