MOUNTING THE STATIONS
To mount a station on the wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the stations.
Follow these steps to mount a station on the wall.
1.Mark the mounting screw locations 23/4 inches (70 mm) apart, one above the other.
2.Drill a hole at each marked location.
3.Thread a screw into each hole until the screw’s head extends about 1/8 inch from the wall.
4.Align the keyhole slots on the bottom of the station with the screw heads, then slide the station down to secure it.
5