PMC-2X Specifications
FRS radio IN/OUT jack: Impedances 1k / 16 Ohms
PTT input jack: NO PTT SW
AUX input jack: Stereo L+R inputs 10 / 10 Ohms
Controls: High / Low Volume adjust button, OFF / Intercom switch
Connectors: Passenger, Driver, Aux in, Ext. PTT,
Audio Output to Headphone: 150mW /
Headphone Impedance: 16 or 32 Ohms
Mic Impedance: 600 Ohms – Unidirectional Electret Condenser
Housing Material: Cases and headset, both high impact ABS plastic
Size: 4.0" x 2.75" x .65” (102 x 70 x 17 mm)
Weight: 3.1 oz. (79 grams)
Batteries: 3 AAA, 1.5V Batteries
Ohms | Specifications subject to change without notice |
PLEASE READ BEFORE USING YOUR PMC-2X
Before you connect your intercom earphone and mic, it is important to make sure that the metal parts of the plug and jack are clean and dry, especially in cold weather. To prevent dirt or moisture from damaging your intercom, always wipe the metal part of the plugs with a clean, dry cloth before plugging in. We also suggest that you use a tuner cleaner spray (available at any electronics supply store) to spray the plugs and jacks once a month to keep the contacts clean.
SERVICE FOR YOUR NADY COMMUNICATOR
(U.S.) Should your motorcycle communicator require service, please contact the Nady Service Department via telephone at (510)
The warranty card enclosed with this system contains additional valuable warranty and serv- ice information. Keep it in a safe place for future possible reference. Do not attempt to service this unit yourself as it will void the warranty.
(International) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product.
Contact your dealer or Nady Systems for more information on our complete line of advanced products for your motorcycle communication needs.
NADY SYSTEMS, INC.
6701 Shellmound Street, Emeryville, CA USA 94608 Tel:
NADY PMC-2X
Driver-Passenger
Personal Motorcycle Communicator
OWNER’S MANUAL