Aiphone JK-DVF-XP manual Specifications, Dimensions, Programming

SPECIFICATIONS

DIMENSIONS:

JK-DVF-XP

PROGRAMMING:

See programming instructions included with the required XP-KIT Programming Starter Kit (sold separately).

Note: Do not attempt to program or use the JK-DVF-XP door station without first reading the initialization instructions included with the XP-KIT Programming Starter Kit!

SPECIFICATIONS:

CARD READER:		DOOR STATION:
Power Source:	12V DC	Power Source:	JK-1MED / JK-1MD master
Current Requirements:	40mA (Avg)	Camera unit:	CMOS Camera
Terminations:	Color-coded pre-wired pigtail	Scanning line:	525 lines
Operating Temperature:	-10°~60°C / 14°~140°F	Min. illumination:	5 Lux at 1' or less
Operating Humidity:	0-95% relative humidity	Terminations:	Screw terminals
	non-condensing	Operating Temperature:	-10°~60°C / 14°~140°F
		Wiring Distance:	330ft w/ 87180250C wire

FCC WARNING:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference that may cause undesired operation.

For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The Reader is intended to be powered from a limited power source output of a previously certified power supply.

Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005	TOLL FREE TECHNICAL SUPPORT:	Pg. 4
(425) 455-0510
	(800) 692-0200	JK-DVF-XP Instr.
FAX (425) 455-0071	E-MAIL: tech@aiphone.com	0110JD