Aiphone GT-2C-L, GT-2H-L operation manual External calls, Presence Security

Page 17

9-3 External calls

1When a separately-installed sensor is activated or the CALL button is pressed, the alarm sounds, and the warning screen displays on the monitor and blinks.

• Only the alarm sounds at sub master monitor stations.

￿￿￿￿￿￿￿￿￿￿￿￿$￿￿￿￿%

￿￿￿￿￿

2Press the [ OFF] button or [ REC/PLAY] button ([ OFF] but- ton for GT-2H-L/GT-2H) to stop the alarm sound.

NOTES: 1. The alarm sound time is set in the external settings. (Refer to sec- tion 10-5.)

The initial setting is 10 minute.

2.When the alarm sound time is set for 1 hour or for the alarm to sound continuously, the monitor warning screen will go out after approximately 10 minutes.

3.Even if the call tone volume is set to 0 (OFF), it will sound at a level equivalent to 10 (HIGH).

9-4 PRESENCE SECURITY, ABSENCE SECURITY setting (master monitor station)

Set the security settings for individual doors and windows. By security settings, intrusions at individual doors or windows will be detected and a security alarm will sound.

•PRESENCE SECURITY

Security setting for when resident is at home sleeping that is applied im- mediately after setting.

•ABSENCE SECURITY

Security setting for when resident is away that is applied after the delay time (section 10-9) elapses after setting.

1In the standby mode, press the [ MENU] button.

2Select "SECURITY" in the "MENU" screen, and press the [ MENU] button.

3Select "PRESENCE SECURITY" or "ABSENCE SECURITY" in the

"SECURITY" screen, and press the [ MENU] button. (Ex.: Selection of "PRESENCE SECURITY")

SECURITY

 

 

 

PRESENCE SECURITY

 

ABSENCE SECURITY

 

[ S1

S2

S3

]

:ON

 

:ALARM ACTIVATED

 

 

START

4In the "SECURITY" screen, confirm the locations that are on alert among sensors 1 through 3 (only sensors for which security settings have been performed will display). To change settings, move the cur-

sor to the location to be changed and press the [ MENU] button.

•Locations will display according to the locations selected when settings were performed last.

SECURITY

 

SENSOR1

[ ENEBLE ]

SENSOR2

[ ENABLE ]

SENSOR3

[ DISABLE ]

SELECT SENSOR TO BE ON ALART.

5Select "ENABLE" or "DISABLE" in the "SECURITY" screen for

each sensor, and press the [ MENU] button.

6Press the [ REC/PLAY] button to return to the step 3 screen, move the cursor with "PRESENCE SECURITY" or "ABSENCE SECURI- TY" and press the [ CALL] button.

7PRESENCE SECURITY is set. For "ABSENCE SECURITY", "AB- SENCE SECURITY" is set after the set time elapses.

•The STATUS LED blinks with a medium interval.

•If there are no operations for approximately 1 minute, the screen display will end.

•If selected locations are open, they will display in red and "CHECK STA- TUS SENSOR" will display on the screen.

•To cancel settings, press the [ MENU] button (cancel) at the step 3 screen.

- 17 -

Page 16 Page 18
Image 17
Page 16 Page 18
Contents GT-2C-L/GT-2C GT-2H-L/GT-2H Negligence could result in death or serious injury PrecautionsOperating Method Master Monitor Station Sub master monitor station GT-2H-L/GT-2H NamesMaster monitor station GT-2C-L/GT-2C Operating Method Master Monitor Station Viewing the Screen Master Monitor StationTurning off the screen display Setting the date and timeAnswering a call Receiving CallsDoctor call master monitor station Door releaseLight control Room-to-room calling CallingCalling security guard stations Monitoring Operation During Communication and Monitoring ZOOM/WIDE switchingPan/tilt operation Individual door zoom picture pre-set master monitor stationNight illumination Backlight adjustment and night sensitivity adjustmentSwitching of surveillance camera monitor in common area Manual recording Recording and Playing Master Monitor StationAutomatic recording Playing recorded pictures Displays on the screen when there are no recorded picturesErasing recorded pictures Saving recorded picturesOption button Alarms and Related InfoEmergency alarm Presence Security External callsRestoration occurs when the security PIN is correct Canceling security alarms master monitor stationLanguage setting Changing Settings Master Monitor StationUsing the Menu Picture memory setting for individual door call 10-3 Call Tone switchingIndividual door call time setting External call sound time duration settingIndividual door night illumination setting Security PIN setting Security alarm sound duration time setting Departure TIMER, Arrival Timer settingSpecifications Technical PrecautionsIndicates applicability to the EU

GT-2C, GT-2H, GT-2C-L, GT-2H-L specifications

The Aiphone GT-2H-L, GT-2C-L, GT-2H, and GT-2C are part of Aiphone's advanced intercom systems known for their reliability, high-quality audio and video communication capabilities, and user-friendly interfaces. These models cater to various security and communication needs in residential and commercial settings.

The GT-2H-L and GT-2C-L are equipped with a robust 7-inch color LCD screen that provides crystal clear video feed, ensuring that users can easily identify visitors at their premises. The GT-2H model features a hands-free monitor, allowing for seamless communication without the need to press a button to speak. In contrast, the GT-2C requires manual activation to communicate, offering an alternative for users who prefer a more traditional intercom experience.

One of the standout features of these models is their multi-tenant capability, which allows them to be integrated into larger apartment or office buildings. This feature supports up to four entrance stations and 16 interior monitors, enabling users to manage communication across multiple locations efficiently. The intuitive interface makes it easy for users to navigate through calls and other functionalities.

A significant technological advancement in the GT series is its Ethernet connectivity. This allows the intercom system to connect to a local network, making it possible to access and control the system remotely through smartphones and tablets. The user-friendly Aiphone app provides added convenience as users can receive notifications and interact with visitors, enhancing security.

Durability is another characteristic of the Aiphone GT series. The intercom units are designed to withstand various environmental conditions, making them suitable for both indoor and outdoor installations. They come with a built-in camera that offers night vision capabilities, ensuring clear video capture even in low-light situations, thus offering round-the-clock monitoring.

In summary, the Aiphone GT-2H-L, GT-2C-L, GT-2H, and GT-2C intercom systems are distinguished by their advanced features, high-definition video quality, multi-tenant capabilities, and robust construction. With their innovative technologies, they provide effective security and communication solutions tailored to meet diverse user requirements, making them a preferred choice for many residential and commercial applications.
Top Page Image Contents