2-10 OPTION button
Pressing the option button allows for operation of connected units to be performed such as turning lights on and off.
2-11 Emergency alarm
1 Press and lock the emergency alarm switch (or when there is a line - off trouble).
2 An alarm will sound from the residential station, and a warning signal will be sent to the security guard station.
4 Lift the handset to communicate with the security guard station. The emergency alarm will sound again when the handset is hung up.
•The TONE OFF LED will light up.
It will go out if the handset is hung up.
5 Release the lock position of the emergency alarm switch to return to the standby position (restore the system to normal status).
Beep
Beep
Beep
3 When there is a call from the security guard station, the warning sound will change to a call tone that will sound for the set amount of time.
• The TONE OFF LED will blink.
NOTES: 1. On the residential station, the emergency alarm and call tone will
be emitted at a loud volume, regardless of the volume setting.
2. The emergency alarm function can be activated even when the sys-
tem is in use. (Alarms can be activated at the same time by up to 5
units.)
3. Residential stations within the same residence will be unable to
receive normal calls while the emergency alarm is sounding. It is
only possible to respond to calls from the security guard station. 4. During an emergency alarm, the entrance station and the security
guard station cannot make calls to the residential station that sets off the alarm.
- 8 -