3-4 Calling from a residential station
1When a call is received from a residential station, a call tone will sound for approxi- mately 10 seconds and the room number and resident name will be displayed.
2Lift the handset to respond.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
3When you are done talking, hang up the handset to end the call.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
NOTES: If a call is not responded to, a record is kept.
The communication will be ended automatically after approximately 1 minute when
Calling from the doorbell button
1When the doorbell button is pressed, a call tone will sound while the button is being pressed.
• A different call tone sounds. (Communication is not possible.)
7 Q R
1
4 GH J5 K
T8
U
0
A2
B
M6
N
9 X Y
D3 E
3-6 Calling entrance stations
1Lift the handset and press the 10 key [ 
] button.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
2Use the 10 key to select the desired entrance station.
With the expanded system, the display number of the entrance station varies depending on the common line connection of the entrance station and security guard station. Connected to same common line: "Set number" is displayed as is
Ex.) Calling entrance station #1: Enter [1] Connected to separate common line: "Set number + 8"
Ex.) Calling entrance station #1: 1 + 8 = 9, so enter [9]
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
3Press the 
button to communicate with the entrance station. If there is no corresponding entrance station, "DENIED" will be displayed.
•While in communication, you can use the light button and door release but- ton.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 |
4When you are done talking, hang up the handset to end the call.
• Communication ends automatically after approximately 3 minutes.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
- 10 -