Aiphone LE-B4, LE-B2 Mounting Instructions, Directory Lamp Installation, Entering TENANT’S Name

MOUNTING INSTRUCTIONS:

1.Cut a hole in the wall that is 9-1/16" x 6-1/8". (Ensure that a mounting depth of at least 2-11/16" is available.)

2.Pass cable through knockout holes.

3.	Secure mounting box to wall so that front of mounting	Call
	box is flush with the outside edge of the wall.	Button
4.	Connect wires to the unit. (See wiring diagram)
5.	Attach the unit to mounting box using the supplied
	screws.

DIRECTORY LAMP INSTALLATION:

1.Attach the lamp mounting plate as shown in the drawing using the supplied screws. The lamp should face the back of the mounting box and point down.

2.Connect the RED wire to “+” of the PS-1225UL.

3.Connect the BLACK wire to the “-“ of the PS-1225UL.

4.Lamp is 12VDC, 1W.

ENTERING TENANT’S NAME:

1.Remove the directory card cover by pressing on the edge of the card cover next to the call button.

2.Remove the directory card in the same manner.

3.Fill in the tenant’s name in the space provided.

4.Replace card and cover.

Aiphone Communication Systems	TOLL FREE TECHNICAL SUPPORT:
1700 130th Ave. N.E.	(800) 692-0200
Bellevue, WA 98005	TOLL FREE FAX LINE:	Pg. 3
(425) 455-0510	(800) 832-3765	LEB24610 Instr.
FAX (425) 455-0071	E-MAIL: tech-serv@aiphone.com	1205JDJS