note 
If you press the SCREEN soft key while another handset is screening a call, you will hear a beep and you can not screen a call.
2)
a)To mute the Call Screen, press the MUTE soft key or play/stop. To cancel muting, press the SCREEN soft key.
b)To answer the call, press speaker or pick up the handset from the base (when AutoTalk is set to on).
From the handset
Press the SCREEN soft key when the system is answering. To mute the Call Screen, press the MUTE soft key. If the handset is away from the base, press talk/flash, speaker or any number key, */tone/<, or #/> (when AutoTalk is set to on). The answering system will disconnect automatically.
Remote Operation
You can check, play, or delete messages, even record a new greeting message from a remote location (when you are away from home, or from another room using a handset). Additionally, you can turn on or off your answering system remotely.
Remote access away from home
You can operate your answering system from a remote location using any touch- tone telephone.
1)Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about 10 rings and sounds a series of beeps.
2)During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within 2 seconds (see "Setting a PIN Code" on page 25).
[ 6 2 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E | w w w . u n i d e n . c o m |