Installing Your Expansion Handset
Follow these three easy steps to get your new handset ready to use: 1 Install the battery pack.
2 Connect the charger and charge your new handset for 15 hours. 3 Register your new handset to the main base.
Step 1: Install the Battery Pack
1 Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
2 Place the battery pack in the battery compartment with the connectors on the battery and on the compartment aligned.
3 Place the battery case cover back on the handset and slide it upwards until it clicks into place.
• Use only the Uniden battery (BT- 0003) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department. (See page 2.)
• Recharge your handset on a regular basis by returning the handset to the charger after each phone call.
Rechargeable
Must Be Recycled or Disposed of Properly
– 3 –