7 Use the headset
Connect the headset to a mobile phone
1 With the mobile phone turned on, pressuntil the LED lights up, to turn on the headset.
»» Once turned on, the headset reconnects automatically to the last device it was connected to.
»» If the last connected device is not available, the headset tries to reconnect to the second to last device that was connected to the headset. If it cannot find this device, it will look for all previously paired devices in the order of last usage, until it finds a device to connect to.The headset stores up to 8 previously paired devices.
If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from your mobile phone’s Bluetooth menu.
Automatic power saving
If the headset cannot find any Bluetooth device to connect to in range within five minutes, it automatically powers down to save battery life.
Control your calls
Turn the headset on/off | Press until the LED turns on/off. |
Check battery | Hold VOL + and VOL - simultaneously. |
>50%: 1 blue flash < 50%: 2 red flashes < 25%: 3 red flashes
Pick up/end a call | Press . |
| |
|
| ||
Adjust Volume | Press VOL +/VOL | ||
Redial the last number | Press | twice quickly. | |
| |||
Reject a call | Hold . |
| |
|
| ||
Activate voice dialing | Hold | until beep occurs. | |
| |||
Transfer a call to a | Hold | during a call. | |
mobile phone | |||
|
| ||
Mute the Mic | Press | twice quickly during a call. | |
|
Manage 3-way calls
If your mobile phone and network operator support
To hold the active call and | Press | while the 2nd call is | |
accept a waiting call | |||
coming in. | |||
| |||
To drop the active call and | Hold | while the 2nd call is | |
accept a waiting call | |||
coming in. | |||
| |||
To swap the active call and the | Press | during a call. | |
call on hold | |||
|
| ||
To drop the active call and | Hold | until a beep sound | |
accept the call on hold | |||
occurs. | |||
| |||
To drop the call on hold | Press | and VOL - until a beep | |
| |||
| sound occurs. | ||
To add the call on hold to an | Press | and VOL + until a beep | |
active call | |||
sound occurs. | |||
|
LED and sound indication
The red/blue LED flashes alternately. | The headset is ready for |
| pairing. |
The blue LED flashes once every 3 | The headset is connected |
seconds. | to the phone. |
The red LED flashes twice every 3 | The headset is not |
seconds. | connected. |
The blue LED flashes once every half | There is an incoming/ |
a second. | outgoing call. |
The blue LED flashes once every | The headset is active on |
second. | a call. |
The red LED flashes three times and | The battery is low in |
beeps twice every minute. | power. |
Solid red LED | The headset is charging. |
The LED is off. | The headset is off./Charging |
| is finished. |
The headset beeps every 5 seconds | The Mic is muted. |
10EN