Warning
•• When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage.
Note
•• The caller ID service is available if you have registered to the caller ID service with your service provider.
Tip
•• When there is a missed call, a notification message appears.
Turn off the ringer for all incoming calls
When the phone rings, press REDIAL/C.
Mute the microphone
1 Press during a call.
»»The handset displays [MUTE ON].
»»The caller cannot hear you, but you can still hear his voice.
2 Press 
again to unmute the microphone.
»»You can now communicate with the caller.
Adjust the earpiece/speaker volume
Press 
/ 
to adjust the volume during a call.
»»The earpiece/speaker volume is adjusted and the phone is back to the call screen.
Make a second call
Note
•• This service is network dependent.
1 Press R during a call.
»»The first call is put on hold.
2 Dial the second number.
»»The number displayed on the screen is dialed out.
Answer a second call
Note
•• This service is network dependent.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in | |
these ways: | |
1 | Press R and to answer the call. |
»»The first call is put on hold, and you are now connected to the second call.
2 Press R and 
to end the current call and answer the first call.
Switch between two calls
1 Press R and 
.
»»The current call is put on hold, and you are now connected to the other call.
Make a conference call with the external callers
Note
•• This service is network dependent. Check with the service provider for additional charges.
12EN