Philips CD1550B, CD 1550 manual Safety information, Equipment Approval Information

Page 4

1 Safety information

1.1Equipment Approval Information

Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.

1.1.1Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed

5.To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular

plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes

This equipment may not be used on coin service provided by the telephone company.

Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.

Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone

company or a qualified installer. US Number is located on the cabinet bottom.

REN Number is located on the cabinet bottom.

1.1.2Rights of the Telephone Company

Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances

2

Safety information

Image 4
Contents US-EN Additional Handset Page Table of contents Equipment Approval Information Safety informationRights of the Telephone Company Safety information Hearing Aid Compatibility FCC RF Radiation Exposure StatementPower requirements Conformity Electric, Magnetic Electromagnetic Fields EMF Page AAA rechargeable Battery door NiMH batteries GuaranteeYour phone What’s in the box Handset ChargerOverview of your phone Earpiece OK key Back/Clear key cNavigation keys Talk key rMicrophone Battery door Loudspeaker Ringer off key #Mute key M Call transfer/Intercom keyiKey Display icons Status barBack key Install your phone Install batteryCharge battery Getting startedTip During 5sUsing your phone Make a call PredialingDirect dialing Answer a callUse more of your phone Use more of your phone Personal settings Handset Tones Set the ring volumeTo Personal SET and press Set the tones melodyChange the display language Activate/deactivate auto hang-upAdvanced settings Technical data DisplayConnection Handset does not switch on Handset does not chargeIcon is not blinking during charge Communication is lost during a callHandset warms up when making a long call My handset keeps going into idle modeProduct behaviour Keypad does not work Handset cannot be registered to the base stationIndex PrintedinChina