Telephone Answering Machine (TAM) |
| EN |
|
| |
Answer On/Off |
|
Turn answering machine On/Off
1.Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Ans. On/Off and press mSELECT.
2.Scroll :to On or Off and press mSELECT to confirm.
Answering Machine settings
1.Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Settings and press mSELECT.
Ring delay
This is the number of rings before the answering machine answers and starts playing your greeting. You can set the answering machine to start playing your greeting after 3 - 8 rings or Toll Saver. The default ring delay is 4.
1.Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Settings and press mSELECT, press mSELECT to enter Ring delay.
2.Scroll : to your desired ring delay setting (3 - 8 rings or Toll Saver) and press mSELECT to confirm.
Toll Saver mode can save you the cost of a
Remote control access
This feature lets you check your messages, or otherwise operate your answering machine, by calling the answering machine and entering a remote access code (which is the same as your Master PIN code) on a tone dialling phone.
Remote control access is only possible if the Master PIN code has been changed (see page 44) and is NOT the default (0000).
Activate/Deactivate remote access
1.Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Settings and press
mSELECT, scroll : to Remote access and press mSELECT.
2.The current selected option is highlighted.
55