Philips Cordles Telephone Install, Connect the base station, Insert batteries and charge

Page 3

EN

1 Connect

Connect the base station

1. Place the base station in a central location near the telephone line socket and electricity sockets.

Power supply

 

 

 

Line cord

 

 

 

 

 

 

Splitter

2.Connect the supplied splitter to the connector at the back of the base station and then plug the line cord and the power cable into the respective line jacks on the splitter.

3.Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

 

Install

 

2

 

Insert batteries and charge

1. Use the coin or screwdriver

2. Place the batteries as indicated 3. Charge handset for 24 hours

to unlock the battery cover.

and replace the cover

anticlockwise

Set date and time

1.Press mMENU.

2.Scroll :to Clock & Alarm and press mSELECT.

3.Press mSELECT to enter Set Date/Time.

4.Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK.

Now, you are ready to use your phone.

3

Image 3
Contents WelcomeEN Handset Base station Line cordUser Guide Quick Start Guide Insert batteries and charge InstallConnect Connect the base stationEnjoy Switch the handset On/Off Keypad lock/unlockPaging Troubleshooting Problem SolutionNeed help?