Manage the area code
Note
•• This feature only applies to models with area code support.
You can define an area code (up to 5 digits). This area code is automatically removed from an incoming call if it matches with the code you define.Then the phone number is saved in the call log without an area code.
Activate/Deactivate auto removal of area code
1 Press MENU.
2 Select [ADVANCED SET] > [AREA CODE], then press OK to confirm.
3 Enter the area code, then press OK to confirm.
»» The setting is saved.
Network type
Note
•• This feature only applies to models with network type support.
1 Press MENU.
2 Select [ADVANCED SET] > [NETWORK TYPE], then press OK.
3 Select a network type, then press OK. »» The setting is saved.
First ring |
| s | |
If you have subscribed for caller ID service with | rançai | ||
your service provider, your phone can suppress | F | ||
the first ring before the caller ID displays on |
| ||
the screen. After the phone is reset, it can |
| ||
detect automatically if the caller ID service |
| ||
is subscribed and start to suppress the first |
| ||
ring.You can change this setting to suit your |
| ||
preference.This feature only applies to models |
| ||
with first ring support. |
| ||
|
|
| |
Turn the first ring on/off |
| ||
1 | Press MENU. |
| |
2 | Select [ADVANCED SET] > [FIRST |
| |
3 | RING], then press OK to confirm. |
| |
Select [ON]/[OFF], press OK to confirm. |
| ||
»» The setting is saved.
Note
•• To reset the first ring status, go to the reset menu.
ECO mode
The ECO mode reduces the transmission power of the handset and base station.
1
2
3
Note
•• When ECO is activated, the connection range between the handset and the base station can be reduced.
EN 27